P0011 Ford Bronco Sport
Intake Camshaft Position Timing Over-Advanced (Bank 1) · Powertrain Code · High · Repair: Moderate
What is P0011?
The intake camshaft timing on bank 1 is more advanced than the ECM commanded. Usually caused by a stuck VVT solenoid, dirty engine oil, or timing chain stretch.
When the Ford Bronco Sport triggers code P0011 (intake camshaft position timing over-advanced (bank 1)), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Ford Bronco Sport.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Ford Bronco Sport.
Common Causes on Ford Bronco Sport
- VCT solenoid stuck advanced on 1.5L or 2.0L EcoBoost engine
- Cam phaser binding from sludge buildup in small EcoBoost engines
- Low oil level causing VCT to default to advanced position
- Contaminated oil restricting VCT oil passages
Symptoms
- Rough idle with noticeable engine vibration
- Poor fuel economy from incorrect valve timing
- Engine stalling at idle or low RPM
- Hard starting especially when engine is warm
- Rattling noise from engine timing area
- Check engine light illuminated
Notes for Ford Bronco Sport
Escape/Bronco Sport EcoBoost engines are prone to sludge with extended intervals; maintain schedule.