P0014 Honda Hr-V
Exhaust Camshaft Position Timing Over-Advanced (Bank 1) · Powertrain Code · High · Repair: Moderate
What is P0014?
The exhaust camshaft timing on bank 1 is more advanced than commanded.
When the Honda Hr-V triggers code P0014 (exhaust camshaft position timing over-advanced (bank 1)), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Honda Hr-V.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Honda Hr-V.
Common Causes on Honda Hr-V
- VTC actuator over-advancing exhaust camshaft
- Stuck or leaking VTC oil control solenoid
- Oil viscosity too thin or oil level overfilled
- Faulty ECM/PCM commanding incorrect cam advance
Symptoms
- Check Engine Light on
- Engine runs rough at idle
- Poor fuel economy
- Hesitation or stumble on acceleration
Notes for Honda Hr-V
Always check Honda service bulletins for ECM updates before replacing mechanical parts — several TSBs address VTC calibration issues.