P0014 Toyota Tacoma
Exhaust Camshaft Position Timing Over-Advanced (Bank 1) · Powertrain Code · High · Repair: Moderate
What is P0014?
The exhaust camshaft timing on bank 1 is more advanced than commanded.
When the Toyota Tacoma triggers code P0014 (exhaust camshaft position timing over-advanced (bank 1)), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Toyota Tacoma.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Toyota Tacoma.
Common Causes on Toyota Tacoma
- Exhaust camshaft OCV solenoid stuck in advanced position — common Toyota VVT-i failure mode
- Sludge buildup in oil galleries feeding the exhaust cam phaser
- Stretched timing chain causing advanced exhaust cam timing
- Incorrect oil viscosity used at last service (5W-30 instead of 0W-20)
Symptoms
- Check Engine Light on
- Hard starting, especially when engine is warm
- Rough idle that may smooth out above 1500 RPM
- Failed emissions test due to elevated NOx
- Occasional backfire on deceleration
Notes for Toyota Tacoma
On 2GR-FE V6 engines, the exhaust OCV is harder to access on bank 2 — budget extra time if replacing both banks.