P0016 Nissan Pathfinder
Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) · Powertrain Code · Critical
What is P0016?
The crankshaft and camshaft position sensors on bank 1 are out of sync. Often caused by a stretched timing chain, jumped timing, or a failed VVT solenoid.
When the Nissan Pathfinder triggers code P0016 (crankshaft position - camshaft position correlation (bank 1 sensor a)), it typically points to an issue in the powertrain system. This is a critical severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Nissan Pathfinder.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Nissan Pathfinder.
Common Causes on Nissan Pathfinder
- Timing chain stretch on 2.5L QR25DE in Rogue (very common)
- VVT solenoid stuck on 3.5L VQ35DE V6 in Pathfinder/Murano
- Crankshaft position sensor failure from oil contamination
- Low oil pressure from worn bearings on high-mileage QR25 engines
Symptoms
- Hard starting or extended cranking before engine fires
- Rough idle with noticeable engine vibration
- Rattling or chain-slap noise on cold startup
- Reduced engine power and sluggish acceleration
- Check engine light illuminated
- Intermittent stalling at idle
Notes for Nissan Pathfinder
Nissan Rogue QR25DE timing chain failure is well-documented; budget for a complete chain kit.