P0101 Ford Bronco Sport
MAF Sensor Circuit Range/Performance · Powertrain Code · Medium · Repair: Easy
What is P0101?
The MAF sensor readings are outside the expected range for the current operating conditions.
When the Ford Bronco Sport triggers code P0101 (maf sensor circuit range/performance), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Ford Bronco Sport.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Ford Bronco Sport.
Common Causes on Ford Bronco Sport
- Dirty or contaminated MAF sensor — very common on EcoBoost due to oiled aftermarket air filters
- Air leak in the intake tract between the MAF sensor and throttle body
- Cracked or loose intake boot (turbo inlet pipe on EcoBoost)
- Failed MAF sensor element
Symptoms
- Check engine light
- Hesitation or stumble on acceleration
- Poor fuel economy
- Rough idle
- Black smoke from exhaust under load (running rich)
Notes for Ford Bronco Sport
If running an oiled aftermarket air filter (K&N etc.), over-oiling is the most common cause — switch to a dry filter or clean the MAF sensor regularly.