P0102 Toyota Camry
MAF Sensor Circuit Low Input · Powertrain Code · Medium · Repair: Easy
What is P0102?
The MAF sensor is reading below its expected range. Could indicate a dirty sensor, air leak, or wiring issue.
When the Toyota Camry triggers code P0102 (maf sensor circuit low input), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Toyota Camry.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Toyota Camry.
Common Causes on Toyota Camry
- MAF sensor signal voltage too low — failed or contaminated hot-wire element
- Open circuit in MAF sensor wiring harness
- Poor ground connection at engine ground strap
- Severely restricted air filter starving the engine of air
Symptoms
- Check Engine Light on
- Engine runs very rich with black exhaust smoke
- Extremely poor fuel economy
- Engine may enter limp mode with limited RPM
Notes for Toyota Camry
Toyota ECMs are sensitive to MAF signal dropout — a brief open circuit can set this code; check connector pin tension before replacing the sensor.