P0113

P0113 Honda Hr-V

Intake Air Temperature Sensor 1 Circuit High · Powertrain Code · Low · Repair: Easy

What is P0113?

The IAT sensor is reading above its expected range — possible open circuit.

When the Honda Hr-V triggers code P0113 (intake air temperature sensor 1 circuit high), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Honda Hr-V.

This repair is rated easy, meaning basic tools, no lift needed.

Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Honda Hr-V.

Common Causes on Honda Hr-V

Symptoms

Recommended Fixes
Replace IAT sensor (often built into the MAF on Honda — replace MAF assembly)
Repair corroded or damaged wiring to IAT sensor
Clean connector pins with electrical contact cleaner

Notes for Honda Hr-V

On most Honda models the IAT is integrated into the MAF sensor housing — replacing just the IAT is not possible, the entire MAF assembly must be replaced.

Check Honda Hr-V Specs

View oil type, torque specs, and maintenance info for the Honda Hr-V.