P0125 Kia Telluride
Insufficient Coolant Temperature for Closed Loop · Powertrain Code · Medium · Repair: Moderate
What is P0125?
The engine is not reaching operating temperature quickly enough for the ECM to enter closed-loop fuel control. Usually caused by a stuck-open thermostat.
When the Kia Telluride triggers code P0125 (insufficient coolant temperature for closed loop), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Kia Telluride.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Kia Telluride.
Common Causes on Kia Telluride
- Stuck-open thermostat preventing engine from reaching operating temperature
- Failed ECT sensor giving inaccurate readings
- Low coolant level from a slow leak
- Thermostat housing gasket leak on Theta II engines
Symptoms
- Check Engine Light on
- Engine takes very long to warm up
- Heater blows lukewarm air
- Poor fuel economy in cold weather
- Temperature gauge stays low
Notes for Kia Telluride
A stuck-open thermostat is the most common cause; coolant should reach operating temp within 5-10 minutes of driving.