P0131 Ford F-150
O2 Sensor Circuit Low Voltage (Bank 1, Sensor 1) · Powertrain Code · Medium · Repair: Moderate
What is P0131?
Low voltage from the upstream O2 sensor on bank 1, indicating a possible lean condition or sensor failure.
When the Ford F-150 triggers code P0131 (o2 sensor circuit low voltage (bank 1, sensor 1)), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Ford F-150.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Ford F-150.
Common Causes on Ford F-150
- Failed upstream O2 sensor (bank 1 sensor 1)
- Exhaust leak before the upstream O2 sensor
- Wiring damage or corroded connector on the O2 sensor
- Rich running condition from another issue masking as an O2 fault
Symptoms
- Check engine light
- Poor fuel economy
- Rough idle
- Failed emissions test
Notes for Ford F-150
Always use Motorcraft or Bosch OE-spec O2 sensors on Ford — cheap aftermarket sensors frequently cause driveability issues on EcoBoost engines.