P0174 Toyota Corolla
System Too Lean (Bank 2) · Powertrain Code · High · Repair: Moderate
What is P0174?
The engine is running lean on bank 2. Same causes as P0171 but affecting the opposite cylinder bank on V-engines.
When the Toyota Corolla triggers code P0174 (system too lean (bank 2)), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Toyota Corolla.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Toyota Corolla.
Common Causes on Toyota Corolla
- Intake manifold gasket leak on bank 2 of 3.5L V6 Camry
- Cracked PCV hose on passenger side of V6 engine
- Mass airflow sensor contamination
- Vacuum leak at brake booster hose
- Bank 2 fuel injector deposits from direct injection on newer models
Symptoms
- Rough idle especially when cold
- Hesitation or stumble on acceleration
- Engine surging at steady throttle
- Lean misfire under load
- Poor fuel economy
- Check engine light illuminated
Notes for Toyota Corolla
P0174 is uncommon on 4-cylinder Camry and Corolla models as they only have one bank. Only V6 Camry models will set this code.