P0301 Dodge Charger
Cylinder 1 Misfire Detected · Powertrain Code · High · Repair: Easy
What is P0301?
Misfire detected in cylinder 1. Typically caused by a worn spark plug, bad ignition coil, faulty fuel injector, or low compression in that cylinder.
When the Dodge Charger triggers code P0301 (cylinder 1 misfire detected), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Dodge Charger.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Dodge Charger.
Common Causes on Dodge Charger
- Ignition coil failure on cylinder 1 on 5.7L or 6.4L Hemi V8
- Spark plug worn from high-RPM driving
- MDS lifter collapse causing misfire on cylinder 1
- Fuel injector failure from carbon deposit buildup
Symptoms
- Rough idle with noticeable engine vibration
- Engine shaking or vibration especially at idle
- Loss of power during acceleration
- Check engine light flashing (indicating catalytic converter damage risk)
- Poor fuel economy from unburned fuel
- Unburned fuel smell from exhaust
Notes for Dodge Charger
Charger/Challenger Hemi dual-plug design means each cylinder has 2 plugs and 2 coils to check.