P0301 Toyota Corolla
Cylinder 1 Misfire Detected · Powertrain Code · High · Repair: Easy
What is P0301?
Misfire detected in cylinder 1. Typically caused by a worn spark plug, bad ignition coil, faulty fuel injector, or low compression in that cylinder.
When the Toyota Corolla triggers code P0301 (cylinder 1 misfire detected), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Toyota Corolla.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Toyota Corolla.
Common Causes on Toyota Corolla
- Individual ignition coil pack failure on cylinder 1 on 2.5L or 1.8L
- Spark plug worn beyond 100K-mile service interval
- Fuel injector deposit buildup from port or direct injection
- Vacuum leak at intake manifold runner near cylinder 1
Symptoms
- Rough idle with noticeable engine vibration
- Engine shaking or vibration especially at idle
- Loss of power during acceleration
- Check engine light flashing (indicating catalytic converter damage risk)
- Poor fuel economy from unburned fuel
- Unburned fuel smell from exhaust
Notes for Toyota Corolla
Toyota ignition coils are very reliable; if one fails, consider replacing all as preventive measure.