P0351

P0351 Honda Accord

Ignition Coil A Primary/Secondary Circuit Malfunction · Powertrain Code · High · Repair: Easy

What is P0351?

The ignition coil for cylinder 1 has an electrical fault.

When the Honda Accord triggers code P0351 (ignition coil a primary/secondary circuit malfunction), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Honda Accord.

This repair is rated easy, meaning basic tools, no lift needed.

Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Honda Accord.

Common Causes on Honda Accord

Symptoms

Recommended Fixes
Replace ignition coil on cylinder 1 (Denso 673-2317 or equivalent)
Inspect coil connector for corrosion, melting, or oil intrusion
Check coil primary resistance (0.5-1.0 ohm) and secondary (6k-15k ohm)
Replace coil boot if cracked or torn — oil-filled boots cause arcing

Notes for Honda Accord

Honda coil-on-plug boots can fill with oil from leaking valve cover gaskets — if oil is present in the spark plug wells, replace the valve cover gasket to prevent repeat failures.

Check Honda Accord Specs

View oil type, torque specs, and maintenance info for the Honda Accord.