P0410 Ford Escape
Secondary Air Injection System Malfunction · Powertrain Code · Medium · Repair: Moderate
What is P0410?
The secondary air injection system has a general fault.
When the Ford Escape triggers code P0410 (secondary air injection system malfunction), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Ford Escape.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Ford Escape.
Common Causes on Ford Escape
- Failed secondary air injection (AIR) pump — motor burned out
- Cracked or disconnected AIR system hoses
- AIR pump relay failure
- Check valve stuck closed preventing air flow to exhaust
Symptoms
- Check engine light
- Slightly higher cold-start emissions
- May hear no air pump noise during cold start
- Failed emissions test
Notes for Ford Escape
Not all Ford models have secondary air injection — this is more common on older V8 models; newer EcoBoost engines do not use this system.