What causes P0440 on a Kia Telluride?

Common causes of P0440 on Kia Telluride: Loose or damaged fuel cap (most common); Cracked EVAP canister; Failed EVAP purge solenoid valve; Leaking EVAP hose connections.

P0440

P0440 Kia Telluride

Q: How much does it cost to fix P0440 on a Kia Telluride?

Fixes for P0440 on Kia Telluride include: Inspect and tighten or replace fuel cap (Kia OE cap), Smoke test EVAP system to find leaks, Replace EVAP canister if cracked, Replace purge solenoid valve if stuck open or closed.

EVAP System Malfunction · Powertrain Code · Low · Repair: Easy

What is P0440?

General EVAP (evaporative emission control) system malfunction. The system that prevents fuel vapors from escaping has detected a fault.

When the Kia Telluride triggers code P0440 (evap system malfunction), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Kia Telluride.

This repair is rated easy, meaning basic tools, no lift needed.

Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Kia Telluride.

Common Causes on Kia Telluride

Loose or damaged fuel cap (most common)
Cracked EVAP canister
Failed EVAP purge solenoid valve
Leaking EVAP hose connections

Symptoms

Check Engine Light on
Fuel odor near vehicle
No driveability issues typically

Recommended Fixes

Inspect and tighten or replace fuel cap (Kia OE cap)

Smoke test EVAP system to find leaks

Replace EVAP canister if cracked

Replace purge solenoid valve if stuck open or closed

Notes for Kia Telluride

Start with the fuel cap; a loose cap causes the majority of P0440 codes on Kia vehicles.

P0440 Kia Telluride

What is P0440?

Common Causes on Kia Telluride

Symptoms

Notes for Kia Telluride

Check Kia Telluride Specs