P0441 Honda Accord
EVAP System Incorrect Purge Flow · Powertrain Code · Low · Repair: Moderate
What is P0441?
The EVAP system is not purging fuel vapors correctly. Usually caused by a faulty purge valve or vacuum line issue.
When the Honda Accord triggers code P0441 (evap system incorrect purge flow), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Honda Accord.
This repair is rated moderate, meaning some experience and specialty tools required.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Honda Accord.
Common Causes on Honda Accord
- Failed EVAP purge solenoid valve (stuck closed or not sealing)
- Disconnected or cracked vacuum hose to purge valve
- Blocked EVAP canister (saturated with fuel from overfilling tank)
- Faulty EVAP system pressure sensor
Symptoms
- Check Engine Light on
- Slight fuel odor in some cases
- Occasional rough idle at startup (excess vapors)
- No major driveability symptoms
Notes for Honda Accord
Habitually topping off the gas tank past the first click is the number one cause of EVAP canister saturation on Honda vehicles.