P0507 GMC Sierra 1500
Idle Air Control System RPM Higher Than Expected · Powertrain Code · Medium · Repair: Easy
What is P0507?
Idle speed is higher than the ECM expects. May be caused by a vacuum leak, stuck IAC valve, or throttle body issue.
When the GMC Sierra 1500 triggers code P0507 (idle air control system rpm higher than expected), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the GMC Sierra 1500.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your GMC Sierra 1500.
Common Causes on GMC Sierra 1500
- Vacuum leak at intake manifold gasket, brake booster hose, or PCV line
- Dirty throttle body allowing excess air past the throttle plate
- Failed idle air control valve (stuck partially open)
- Air leak in the PCV system (common on GM 2.5L and 1.5T engines)
Symptoms
- Check Engine Light on
- Idle speed higher than normal (typically over 800-900 RPM)
- Idle may not come down after revving the engine
- Slight whistling noise from vacuum leak
Notes for GMC Sierra 1500
On GM vehicles, P0507 is most often a simple vacuum leak — a thorough visual inspection of all vacuum hoses usually reveals the source.
