P0507 Hyundai Elantra
Idle Air Control System RPM Higher Than Expected · Powertrain Code · Medium · Repair: Easy
What is P0507?
Idle speed is higher than the ECM expects. May be caused by a vacuum leak, stuck IAC valve, or throttle body issue.
When the Hyundai Elantra triggers code P0507 (idle air control system rpm higher than expected), it typically points to an issue in the powertrain system. Below you'll find the most common causes, symptoms, and repair options specific to the Hyundai Elantra.
This repair is rated easy, meaning basic tools, no lift needed.
Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Hyundai Elantra.
Common Causes on Hyundai Elantra
- Vacuum leak from cracked PCV hose or intake boot
- Dirty throttle body causing the ECM to over-compensate idle
- Stuck-open IAC valve or IACV solenoid
- Intake manifold gasket leak
Symptoms
- Check Engine Light on
- Idle speed higher than normal (above 800-900 RPM)
- Idle does not settle after warm-up
- Slight engine racing feel at stops
Notes for Hyundai Elantra
Check the small vacuum hoses connected to the intake manifold first; cracked PCV hoses are a very common cause on Hyundai.