P0562

P0562 Chevrolet Malibu

System Voltage Low · Powertrain Code · High · Repair: Easy

What is P0562?

System voltage is below the expected range. Could indicate a failing alternator, bad battery, or excessive electrical draw.

When the Chevrolet Malibu triggers code P0562 (system voltage low), it typically points to an issue in the powertrain system. This is a high severity code, so address it promptly to avoid further damage or safety concerns. Below you'll find the most common causes, symptoms, and repair options specific to the Chevrolet Malibu.

This repair is rated easy, meaning basic tools, no lift needed.

Diagnostic data on this page is compiled from publicly available repair resources and technical service bulletins. Always have a qualified mechanic confirm the diagnosis before authorizing repairs on your Chevrolet Malibu.

Common Causes on Chevrolet Malibu

Symptoms

Recommended Fixes
Test battery with load tester and replace if weak (use GM-recommended Group 48/H6 or equivalent)
Clean and tighten battery terminals and cable ends
Test alternator output (should be 13.8-14.7V at idle)
Test for parasitic draw (should be under 50mA with vehicle off)
Check and clean engine and body ground straps

Notes for Chevrolet Malibu

GM vehicles with numerous electronic modules are sensitive to voltage drops — always check battery health first as a weak battery can trigger multiple unrelated codes.

Check Chevrolet Malibu Specs

View oil type, torque specs, and maintenance info for the Chevrolet Malibu.