1999 Kia Sportage
Vehicle Specs & Maintenance Data
The 1999 Kia Sportage maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Kia Sportage.
For oil changes, the 1999 Kia Sportage takes 5W-30 Full Synthetic motor oil with a capacity of 4.8 quarts. Brake fluid type is DOT 3, the recommended coolant is Phosphate-based Green/Blue, and transmission fluid is SP-IV-M (ATF). Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Kia Sportage, torque the lug nuts to 65-87 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 5 NHTSA safety recalls on file for the 1999 Kia Sportage. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 1999 Kia Sportage uses 5W-30 Full Synthetic motor oil (4.8 qt capacity), requires lug nuts torqued to 65-87 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 1999 Kia Sportage.
No known problems reported for this vehicle yet.
5 NHTSA safety recalls for the 1999 Kia Sportage. Check your VIN at NHTSA.gov
EXTERIOR LIGHTING:HEADLIGHTS
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
EXTERIOR LIGHTING
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
SEAT BELTS:FRONT:BUCKLE ASSEMBLY
ON CERTAIN PASSENGER AND SPORT UTILITY VEHICLES, THE FRONT SAFETY BELT BUCKLES MAY EMIT A "CLICK" SOUND DURING THE BUCKLING PROCESS THAT IS SIMILAR TO THE SOUND EMITTED WHEN A BUCKLE IS BEING LATCHED, WHEN IT IS NOT.
THE LATCH CAN THEN PULL OUT OF THE BUCKLE WHEN TENSION IS APPLIED.
DEALERS WILL REPLACE BOTH FRONT SEAT BELT BUCKLES. THE RECALL BEGAN AUGUST 16, 2004. OWNERS SHOULD CONTACT KIA AT 1-800-333-4542.
ELECTRICAL SYSTEM:WIRING
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE WIRES CONNECTED TO THE C123 AND C124 CONNECTORS CAN BE PUT UNDER TENSION BY MOVEMENT OF THE ENGINE, THUS PULLING THE WIRES AND CONNECTORS, LOOSENING THEM AND RESULTING IN A LOSS OF CIRCUIT CONTINUITY.
THIS CONDITION CAN CAUSE ENGINE STALLING, INCREASING THE RISK OF A CRASH.
DEALERS WILL INSTALL SPRING CLIPS TO LOCK THE CONNECTORS TOGETHER. IN ADDITION, THE DEALERS WILL BE INSTRUCTED TO SOLDER A SPLICE IN THE WIRE HARNESS.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES WITHOUT AN ANTI-LOCK BRAKING SYSTEM (ABS). THE STEERING INTERMEDIATE SHAFT COUPLING CAN CONTACT A HYDRAULIC BRAKE PIPE CAUSING FLUID LEAKAGE.
THIS CONDITION CAN CAUSE A LOSS OF REAR BRAKE INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT AND, IF NECESSARY, INCREASE THE CLEARANCE BETWEEN THE BRAKE PIPE AND STEERING INTERMEDIATE SHAFT COUPLING.