2000 Aston Martin Db7
Vehicle Specs & Maintenance Data
The 2000 Aston Martin Db7 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Aston Martin Db7.
For oil changes, the 2000 Aston Martin Db7 takes 5W-40 Full Synthetic motor oil with a capacity of 10.5 quarts. Brake fluid type is DOT 4, the recommended coolant is OAT Coolant (Red), and transmission fluid is ZF Lifeguard 8 (ATF). Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Aston Martin Db7, torque the lug nuts to 65-75 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 4 NHTSA safety recalls on file for the 2000 Aston Martin Db7. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2000 Aston Martin Db7 uses 5W-40 Full Synthetic motor oil (10.5 qt capacity), requires lug nuts torqued to 65-75 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2000 Aston Martin Db7.
No known problems reported for this vehicle yet.
4 NHTSA safety recalls for the 2000 Aston Martin Db7. Check your VIN at NHTSA.gov
STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS
ON CERTAIN PASSENGER VEHICLES,THE POWER ASSISTED STEERING HIGH PRESSURE FLEXIBLE HOSE MAY CONTACT THE LEFT HAND EXHAUST MANIFOLD. IT IS POSSIBLE THAT THE HOSE MAY SCORCH THROUGH RESULTING IN A PROGRESSIVE LOSS OF HYDRAULIC FLUID AND POWER ASSISTANCE.
THIS COULD INCREASE THE RISK OF A CRASH.
DEALERS WILL REPOSITION THE HOSE AND REPLACE THE HOSE IF NECESSARY. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING APRIL 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT ASTON MARTIN AT 1-201-818-8352.
STEERING: STEERING WHEEL/HANDLE BAR
VEHICLE DESCRIPTION: SIX CYLINDER AND TWELVE CYLINDER VARIANTS. THE STEERING COLUMN LIGHTING SWITCH GEAR HAS THE POTENTIAL TO TRAP WIRES, LEADING TO A PARTIAL LOSS OF LIGHTING FUNCTIONALITY.
DEPENDING ON WHICH WIRES ARE TRAPPED, THE LOSS OF LIGHTING FUNCTION CAN VARY.
DEALERS WILL REPLACE THE SWITCH GEAR ASSEMBLY. OWNER NOTIFICATION BEGAN JULY 12, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT ASTON MARTIN AT 201-818-8352.
POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE CAN START UP ON SIX OF THE TWELVE CYLINDERS. THIS IS DUE TO ONE OF THE TWO POWERTRAIN CONTROL MODULES NOT OPERATING WITH ITS DESIGN SPECIFICATION. THIS CONDITION WILL BE EVIDENT BY A LACK OF ENGINE POWER AND OR SMOKE FROM THE EXHAUST TAIL PIPE.
IF THE ENGINE CONTINUES TO RUN IN THIS CONDITION, IT COULD RESULT IN DAMAGE TO THE EXHAUST CATALYST DUE TO OVERHEATING.
DEALERS WILL REPLACE BOTH POWERTRAIN CONTROL MODULES WITH RECALIBRATED PROGRAMS.
STEERING:LINKAGES
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE WELDS SECURING THE FRONT DAMPER LOWER MOUNTING BRACKET COULD BE INADEQUATE RESULTING IN SEPARATION OF THE BRACKET.
THE SEPARATED BRACKET COULD DISPLACE THE DAMPER, AND LIMIT STEERING ACTION.
DEALERS WILL INSPECT AND REPLACE THE FRONT DAMPER LOWER MOUNTING BRACKET.