2000 Ford F-350 Super Duty
Vehicle Specs & Maintenance Data
The 2000 Ford F-350 Super Duty maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Ford F-350 Super Duty.
For oil changes, the 2000 Ford F-350 Super Duty takes 5W-30 Full Synthetic motor oil with a capacity of 7.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Ford F-350 Super Duty, torque the lug nuts to 150-165 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 5 NHTSA safety recalls on file for the 2000 Ford F-350 Super Duty. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2000 Ford F-350 Super Duty uses 5W-30 Full Synthetic motor oil (7.5 qt capacity), requires lug nuts torqued to 150-165 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2000 Ford F-350 Super Duty.
No known problems reported for this vehicle yet.
5 NHTSA safety recalls for the 2000 Ford F-350 Super Duty. Check your VIN at NHTSA.gov
EQUIPMENT:ELECTRICAL
CERTAIN CEQUENT 90 DEGREE 7-WAY RIGHT ANGLE ADAPTORS SOLD BY DISTRIBUTORS IN TOW PACKAGES FOR AFTERMARKET SALES TO TOW 5TH WHEEL RV TRAVEL TRAILERS. DUE TO INCORRECT WIRING OF THE HARNESS, THE TRAILER LIGHTS MAY NOT OPERATE PROPERLY.
IF THE TRAILER LIGHTS ARE NOT WORKING PROPERLY, A VEHICLE CRASH CAN OCCUR.
ALL OF THE DEFECTIVE TOW PACKAGES ARE STILL AT THE DISTRIBUTOR LEVEL AND HAVE NOT BEEN SOLD TO ANY CONSUMERS.
VEHICLE SPEED CONTROL
ON CERTAIN TRUCKS EQUIPPED WITH SPEED CONTROL, GASOLINE OR NATURAL GAS ENGINES, THE SPEED CONTROL DEACTIVATION SWITCH MAY OVERHEAT.
OVERHEATING COULD RESULT IN SMOKE OR BURN AND AN UNDERHOOD FIRE.
DEALERS WILL INSTALL A FUSED WIRING HARNESS INTO THE SPEED CONTROL SYSTEM FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 7, 2006. OWNERS MAY CONTACT FORD AT 1-866-436-7332. (NOTE: ALSO SEE RECALLS 05V017 AND 05V388)
VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
VEHICLE DESCRIPTION: PASSENGER CARS, SPORT UTILITY VEHICLES, AND LIGHT AND MEDIUM DUTY PICKUP TRUCKS. A SWITCH LOCATED IN THE PLASTIC COVER OF THE WIPER MOTOR GEAR CASE COULD MALFUNCTION AND OVERHEAT, POTENTIALLY RESULTING IN LOSS OF INTERMITTENT WIPER FUNCTION, LOSS OF WIPER PARK FUNCTION, COMPLETE LOSS OF WIPER FUNCTION, OR IGNITION OF THE PLASTIC COVER MATERIAL. SWITCH MALFUNCTION IS MOST LIKELY TO OCCUR WHEN THE INTERMITTENT SETTING OF THE WIPERS IS BEING USED, OR WHEN SNOW OR ICE OBSTRUCTS THE BLADES FROM RETURNING TO THE "PARKED" POSITION AT THE BOTTOM OF THE WINDSHIELD. THESE VEHICLES WERE BUILT AT THE FOLLOWING ASSEMBLY PLANTS: ATLANTA PLANT FROM 2/11/00 THROUGH 7/31/00; CHICAGO PLANT FROM 2/14/00 THROUGH 8/4/00; KANSAS CITY PLANT FROM 2/26/00 TO 9/4/00; KENTUCKY TRUCK PLANT FROM 2/18/00 TO 8/31/00; MICHIGAN TRUCK PLANT FROM 2/23/00 THROUGH 8/3/00; NORFOLK PLANT FROM 2/21/00 THROUGH 7/27/00; WAYNE STAMPING AND ASSEMBLY PLANT FROM 2/25/00 THROUGH 8/15/00; AND WIXOM PLANT FROM 2/15/00 THROUGH 8/8/00.
LOSS OF VISIBILITY WHILE DRIVING INCREASES THE RISK OF A CRASH.
DEALERS WILL INSPECT THE DATE CODE ON THE WIPER MOTOR. MOTORS BUILT WITH THE SUSPECT TIME FRAME WILL HAVE THE WIPER MOTOR GEAR CASE COVER REPLACED. OWNER NOTIFICATION BEGAN AUGUST 20, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-866-436-7332.
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
VEHICLE DESCRIPTION: PICKUP TRUCKS EQUIPPED WITH GASOLINE ENGINES AND 8 FOOT BOXES, MAY NOT FULLY SATISFY THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." IN A 30 MPH FRONTAL BARRIER CRASH TEST, A FUEL TANK VAPOR RECOVERY VALVE SEPARATED INTERNALLY. DURING THE SUBSEQUENT STATIC ROLLOVER TEST, FUEL SPILLAGE EXCEEDED THE SPECIFIED RATE.
FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
DEALERS WILL INSTALL A STOP PLATE ASSEMBLY ON THE VEHICLE FRAME TO PREVENT RECOVERY VALVE CONTACT WITH A FRAME CROSSMEMBER DURING THE IMPACT SEQUENCE.
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
VEHICLE DESCRIPTION: GASOLINE AND DIESEL ENGINE PICKUP TRUCKS EQUIPPED WITH 8 FOOT BEDS, DO NOT FULLY SATISFY THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THE FUEL TANK FRONT STRAP ISOLATOR MAY NOT BE PROPERLY POSITIONED WHICH COULD RESULT IN THE STRAP CUTTING THE TANK DURING A 30 MPH FRONT BARRIER TEST, RESULTING IN FUEL SPILLAGE.
DURING THE SUBSEQUENT STATIC ROLLOVER TEST, FUEL SPILLAGE EXCEEDED THE SPECIFIED RATE, INCREASING THE RISK OF A FIRE.
DEALERS WILL REPOSITION THE FRONT STRAP ISOLATOR.