2000 Mazda Mpv
Vehicle Specs & Maintenance Data
The 2000 Mazda Mpv maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mazda Mpv.
For oil changes, the 2000 Mazda Mpv takes 5W-30 Full Synthetic motor oil with a capacity of 5 quarts. Brake fluid type is DOT 3, the recommended coolant is FL22 Long Life Coolant (Green), and transmission fluid is Mazda ATF FZ. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mazda Mpv, torque the lug nuts to 79-108 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 5 NHTSA safety recalls on file for the 2000 Mazda Mpv. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2000 Mazda Mpv uses 5W-30 Full Synthetic motor oil (5 qt capacity), requires lug nuts torqued to 79-108 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2000 Mazda Mpv.
No known problems reported for this vehicle yet.
5 NHTSA safety recalls for the 2000 Mazda Mpv. Check your VIN at NHTSA.gov
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
VEHICLE DESCRIPTION: CERTAIN MINI VANS WITHOUT ANTI-LOCK BRAKING SYSTEMS (ABS) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." DUE TO INAPPROPRIATE BRAKE PIPE LAYOUT, THESE VEHICLES DO NOT MEET THE BRAKE STOPPING DISTANCE WITH PARTIAL FAILURE REQUIREMENTS OF THE STANDARD.
IF PARTIAL FAILURE OCCURRED IN THE BRAKING SYSTEM, THE STOPPING DISTANCE OF THE VEHICLE COULD INCREASE, INCREASING THE RISK OF A CRASH.
DEALERS WILL MODIFY THE BRAKE SYSTEM. OWNER NOTIFICATION BEGAN JANUARY 15, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MAZDA AT 1-800-222-5500, OPTION #4.
EQUIPMENT:OTHER:LABELS
VEHICLE DESCRIPTION: MINI VANS. THESE MINI VANS DO NOT HAVE TIRE INFORMATION LABELS THAT COMPLY WITH SECTION 5.3 OF FMVSS 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS."
OWNERS WILL BE SENT ACCURATE TIRE INFORMATION LABELS AND OWNER MANUAL INSERTS.
EQUIPMENT:OTHER:LABELS
VEHICLE DESCRIPTION: MINI VANS EQUIPPED WITH ORIGINAL EQUIPMENT 16 INCH TIRES. THESE MINI VANS DO NOT HAVE THE CORRECT RECOMMENDED COLD INFLATION PRESSURE ON THE LABEL AND THUS DO NOT COMPLY WITH SECTION 5.1.2 OF FMVSS 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS."
OWNERS WILL BE SENT ACCURATE TIRE INFORMATION LABELS AND OWNER MANUAL INSERTS. IN ADDITION, OWNERS OF MPV'S WITH 16" TIRES WILL BE ADVISED TO CHECK THEIR TIRE PRESSURE TO MAKE SURE THAT THE TIRES ARE INFLATED TO 35 PSI.
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
VEHICLE DESCRIPTION: MINIVANS. DUE TO THE INAPPROPRIATE SHAPE OF THE LINKAGE IN THE REAR DOOR LOCK CONTROLLER, ACCUMULATED DUST MAY PREVENT THE DOOR LOCK MECHANISM FROM FUNCTIONING PROPERLY, CAUSING INCOMPLETE LOCKING OF THE DOOR WHEN THE CHILDPROOF LOCKING SYSTEM IS USED.
THIS COULD RESULT IN AN OPENING OF THE DOOR WHILE DRIVING, INCREASING THE RISK OF PERSONAL INJURY TO A VEHICLE OCCUPANT.
DEALERS WILL INSTALL PARTS IN THE LATCHING ASSEMBLY THAT WILL PREVENT THIS PROBLEM FROM OCCURRING.
ENGINE AND ENGINE COOLING:ENGINE:GASOLINE
VEHICLE DESCRIPTION: MINIVANS EQUIPPED WITH ENGINES SUPPLIED BY FORD MOTOR COMPANY CLEVELAND ENGINE PLANT. THESE ENGINES ARE INSTALLED WITH FUEL INJECTORS THAT DO NOT MATCH THE LOWER INTAKE MANIFOLD
THIS CAN RESULT IN A FUEL LEAKAGE.
DEALERS WILL REPLACE THE LOWER INTAKE MANIFOLD ASSEMBLY.