2003 Dodge Viper
Vehicle Specs & Maintenance Data
The 2003 Dodge Viper maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Dodge Viper.
For oil changes, the 2003 Dodge Viper takes 5W-40 Full Synthetic motor oil with a capacity of 10 quarts. Brake fluid type is DOT 3, the recommended coolant is Mopar OAT (Purple/Violet), and transmission fluid is Mopar MTX 75W-85. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Dodge Viper, torque the lug nuts to 80-100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 4 NHTSA safety recalls on file for the 2003 Dodge Viper. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2003 Dodge Viper uses 5W-40 Full Synthetic motor oil (10 qt capacity), requires lug nuts torqued to 80-100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2003 Dodge Viper.
No known problems reported for this vehicle yet.
4 NHTSA safety recalls for the 2003 Dodge Viper. Check your VIN at NHTSA.gov
AIR BAGS:FRONTAL
Chrysler (FCA US LLC) is recalling certain model year 2002-2003 Jeep Liberty vehicles manufactured January 9, 2001, to March 28, 2003, 2002-2004 Jeep Grand Cherokee vehicles manufactured February 13, 2001, to May 23 2003, and 2003-2004 Dodge Viper vehicles manufactured November 1, 2001, to June 30, 2004. Due to electrical noise beyond the tolerance of the air bag electronic control module (ECM), a component in the ECM may fail, causing the front air bags, side air bags, and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated.
Inadvertent deployment of the air bags may increase the risk of injury and the possibility of a vehicle crash.
Chrysler dealers will replace the air bag control module and side impact sensors as required, free of charge. This recall remedy was applied during earlier recall campaigns of these vehicles under safety recalls 12V527 and 13V040. All owners that have not had the recall repair performed under safety recalls 12V527 or 13V040 are strongly encouraged to have it performed and not wait for the final remedy to be deployed to the field. The recall began on December 29, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R06.
AIR BAGS
Chrysler is recalling certain model year 2003 and 2004 Dodge Viper vehicles manufactured from November 1, 2001, through June 30, 2004. A component in the air bag control module may fail causing the front airbags and/or seatbelt pretensioners to deploy inadvertently while the vehicle is being operated.
Inadvertent deployment of the airbags and/or seat belt pretensioners could increase the risk of personal injury and the possibility of a crash.
Chrysler will notify owners, and dealers will repair the vehicles free of charge. An interim notification iwas sent to owners on March 18, 2013. The recall began on March 26, 2014. Owners may contact Chrysler at 1-800-853-1403.
EXTERIOR LIGHTING:HEADLIGHTS:SWITCH
ON CERTAIN PASSENGER VEHICLES, THE MULTIFUNCTION SWITCH PARK LAMP CONTACTS MAY CORRODE.
THIS CORROSION COULD CAUSE THE PARK LAMPS, HEAD LAMPS AND/OR INSTRUMENT PANEL LAMPS TO FLICKER OR BECOME INOPERATIVE. THIS COULD AFFECT DRIVER VISIBILITY, INCREASING THE RISK OF A CRASH.
DEALERS WILL REFLASH THE SOFTWARE IN THE BODY CONTROL MODULE. OWNER NOTIFICATION BEGAN ON DECEMBER 1, 2003. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-992-1997.
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
ON CERTAIN PASSENGER VEHICLES, THE FUEL PUMP WIRING MAY BECOME CHAFED BY AN UNDERBODY HEAT SHIELD.
THIS COULD CAUSE THE FUEL PUMP FUSE TO OPEN, RESULTING IN AN ENGINE STALL, INCREASING THE RISK OF A CRASH.
DEALERS WILL INSTALL A PROTECTIVE WRAP ON THE FUEL PUMP WIRING HARNESS AND COVER THE EDGE OF THE HEAT SHIELD. OWNER NOTIFICATION BEGAN SEPTEMBER 9, 2003. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.