2003 GMC Safari
Vehicle Specs & Maintenance Data
The 2003 GMC Safari maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your GMC Safari.
For oil changes, the 2003 GMC Safari takes 5W-30 motor oil with a capacity of 4.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the GMC Safari, torque the lug nuts to 140 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2003 GMC Safari. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2003 GMC Safari uses 5W-30 motor oil (4.5 qt capacity), requires lug nuts torqued to 140 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2003 GMC Safari.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2003 GMC Safari. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
EXTERIOR LIGHTING
CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.
SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
CERTAIN MINIVANS HAVE AN INTERFERENCE CONDITION BETWEEN THE LOWER BALL JOINT RUBBER BOOT AND THE STEERING KNUCKLE (BOTH LEFT/RIGHT SIDES), WHICH COULD RESULT IN CUTTING OF THE BOOT THAT IS INTENDED TO SEAL THE BALL JOINT. IF THE LOWER BALL JOINT BOOT WERE CUT, CONTAMINATION FROM THE ROAD (SALT, DIRT, WATER, ETC.) COULD ENTER THE BALL SOCKET AREA OF THE BALL JOINT CAUSING THE JOINT TO WEAR OUT TOO QUICKLY.
THE STEERING KNUCKLE COULD SEPARATE FROM THE LOWER CONTROL ARM, DROPPING DOWN THE AFFECTED CORNER OF THE VEHICLE. THE COIL SPRING WOULD PUSH THE CONTROL ARM DOWN INTO CONTACT WITH THE GROUND, CREATING A DRAG THAT WOULD SLOW THE VEHICLE. THE DRIVER COULD HAVE DIFFICULTY IN MAINTAINING THE DIRECTIONAL CONTROL OF THE VEHICLE. IN ADDITION, THE AFFECTED WHEEL ASSEMBLY COULD SEPARATE FROM THE VEHICLE IF FORCES RESULTING FROM THE WHEEL'S DRAGGING ACTION WERE SUFFICIENT TO FRACTURE THE TIE ROD END AND UPPER BALL JOINT CONNECTIONS. SEPARATION OF THE WHEEL ASSEMBLY WOULD ALSO SEVER THAT WHEEL'S HYDRAULIC BRAKE HOSE, RESULTING IN LOST BRAKING PERFORMANCE FROM THE FRONT BRAKE SYSTEM. VEHICLE STOPPING DISTANCE WOULD INCREASE, WHICH COULD RESULT IN A CRASH.
DEALERS WILL REPLACE THE STEERING KNUCKLES. OWNER NOTIFICATION IS EXPECTED TO BEGIN ON APRIL 8, 2004. OWNERS SHOULD CONTACT CHEVROLET AT 1-800-630-2438 OR GMC AT 1-866-996-9463.