2003 Suzuki Grand Vitara
Vehicle Specs & Maintenance Data
The 2003 Suzuki Grand Vitara maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Suzuki Grand Vitara.
For oil changes, the 2003 Suzuki Grand Vitara takes 5W-30 Full Synthetic motor oil with a capacity of 4.8 quarts. Brake fluid type is DOT 3, the recommended coolant is Super Long Life Coolant (Blue/Green), and transmission fluid is Suzuki ATF 3317. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Suzuki Grand Vitara, torque the lug nuts to 73 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 4 NHTSA safety recalls on file for the 2003 Suzuki Grand Vitara. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2003 Suzuki Grand Vitara uses 5W-30 Full Synthetic motor oil (4.8 qt capacity), requires lug nuts torqued to 73 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2003 Suzuki Grand Vitara.
No known problems reported for this vehicle yet.
4 NHTSA safety recalls for the 2003 Suzuki Grand Vitara. Check your VIN at NHTSA.gov
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR
ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 16-INCH WHEELS, THE FRONT BRAKE DISCS MAY BREAK UNDER SEVERE DRIVING CONDITIONS. THE BREAKAGE CAN OCCUR IN CONDITIONS WHERE THE VEHICLE IS DRIVEN ON A REGULAR BASIS ON EXTREMELY STEEP PAVED DOWN-SLOPES WHILE CONTINUOUSLY APPLYING THE BRAKES.
THE FRONT BRAKES MAY BECOME INOPERATIVE AND THE VEHICLE MAY PULL TO ONE SIDE. THIS COULD RESULT IN A CRASH WITHOUT PRIOR WARNING.
DEALERS WILL REPLACE THE FRONT BRAKE DISCS ON THESE VEHICLES. THE RECALL BEGAN ON NOVEMBER 10, 2005. THESE VEHICLES ARE LOCATED ON ST. THOMAS ISLAND (VIRGIN ISLANDS). OWNERS MAY CONTACT SUZUKI DEL CARIBE AT 787-622-0600.
FUEL SYSTEM, GASOLINE
ON CERTAIN PASSENGER VEHICLES, UNDER AMBIENT TEMPERATURES BELOW -25 DEGREES CELSIUS, MOISTURE CAN FREEZE IN THE FUEL PRESSURE REGULATOR. AS A RESULT, FUEL SYSTEM PRESSURE MAY INCREASE AT THE TIME OF ENGINE START UP, CAUSING FUEL LOSS AT THE FUEL PIPE/FUEL HOSE CONNECTION.
FUEL LOSS IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE.
DEALERS WILL REPLACE THE FUEL PRESSURE REGULATOR, THE FUEL DELIVER HOSE AND REPLACE THE HOSE CLAMP WITH AN IMPROVED CLAMP. THE RECALL BEGAN ON SEPTEMBER 29, 2004. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.
VEHICLE SPEED CONTROL:CABLES
ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE CASING CAP THAT IS ATTACHED TO THE VEHICLE FIREWALL CAN CRACK DUE TO EXTENDED EXPOSURE TO FORCES FROM THE ACCELERATOR CABLE AND INSUFFICIENT LONG-TERM DURABILITY OF THE PLASTIC CASING CAP. IF THE CASING CAP BECOMES CRACKED, MOVEMENT OF THE INNER ACCELERATOR CABLE THROUGH THE CAP CAN CAUSE THE INNER ACCELERATOR CABLE TO BECOME FRAYED.
IF THE INNER ACCELERATOR CABLE BECOMES FRAYED, IT CAN STICK DURING VEHICLE OPERATION. IN THE CASE WHERE AN ACCELERATOR CABLE STICKS, THE DRIVER COULD HAVE DIFFICULTY CONTROLLING VEHICLE SPEED, WHICH COULD RESULT IN A CRASH.
DEALERS WILL REPLACE THE ACCELERATOR CABLE, WHICH INCLUDES THE PLASTIC CASING CAP. OWNER NOTIFICATION BEGAN ON JANUARY 5, 2004. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.
VISIBILITY:WINDSHIELD
CERTAIN PASSENGER (111 MY 2002 ESTEEM, 777 MY 2002 AERIO, 2,368 MY 2003 AERIO) AND SPORT UTILITY (324 MY 2002 GRAND VITARA, 274 MY 2003 GRAND VITARA, 684 MY 2002 GRAND VITARA XL-7, AND 781 MY 2003 GRAND VITARA XL-7) VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING." THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY DUE TO INSUFFICIENT ADHESION BETWEEN THE PAINT APPLIED DURING THE SECOND-STAGE PAINTING PROCESS AND THE PAINT APPLIED DURING FINAL-STAGE PAINTING.
IF THE WINDSHIELD IS NOT PROPERLY SECURED, IT MAY SEPARATE FROM THE VEHICLE DURING A CRASH WHICH COULD RESULT IN THE EJECTION OF UNBELTED OCCUPANTS, INCREASING THE RISK OF SEVERE INJURY OR DEATH.
DEALERS WILL INSPECT THESE VEHICLES. VEHICLES THAT ARE FOUND TO HAVE INSUFFICIENT PAINT ADHESION WILL EITHER HAVE THE PROBLEM REMEDIED BY REPAINTING, OR WILL BE REPLACED, OR REPURCHASED AND DESTROYED. OWNER NOTIFICATION BEGAN ON JULY 8, 2003. OWNERS SHOULD CONTACT SUZUKI AT 1-800-934-0934.