2006 Subaru Forester
Vehicle Specs & Maintenance Data
The 2006 Subaru Forester maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Subaru Forester.
For oil changes, the 2006 Subaru Forester takes 0W-20 Full Synthetic motor oil with a capacity of 4.4 quarts. Brake fluid type is DOT 3, the recommended coolant is Super Long Life Coolant (Blue), and transmission fluid is Subaru ATF. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Subaru Forester, torque the lug nuts to 58-72 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2006 Subaru Forester. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2006 Subaru Forester uses 0W-20 Full Synthetic motor oil (4.4 qt capacity), requires lug nuts torqued to 58-72 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2006 Subaru Forester.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2006 Subaru Forester. Check your VIN at NHTSA.gov
SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
SUBARU IS RECALLING CERTAIN MODEL YEAR 2002-2007 IMPREZA, MODEL YEAR 2003-2008 FORESTER, AND MODEL YEAR 2005-2006 SAAB 9-2X VEHICLES MANUFACTURED FROM SEPTEMBER 5, 2000 THROUGH NOVEMBER 26, 2007 ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, MASSACHUSETTS, MARYLAND, MICHIGAN, NEW HAMPSHIRE, NEW YORK, PENNSYLVANIA, VERMONT, WISCONSIN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MAINE, MINNESOTA, MISSOURI, NEW JERSEY, OHIO, RHODE ISLAND, WEST VIRGINIA AND THE DISTRICT OF COLUMBIA. THE FRONT LOWER CONTROL ARMS MAY BREAK AT THE HANGER BRACKETS DUE TO CORROSION IF THE HANGER BRACKET IS EXPOSED TO SALTY AND HUMID ENVIRONMENTS SUCH AS ROADS CONTAINING SNOW MELTING AGENT.
A BROKEN CONTROL ARM CAN RESULT IN THE LOSS OF CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
SUBARU WILL HANDLE THEIR VEHICLES AND SAAB WILL HANDLE THEIRS. DEALERS WILL INSPECT THE DEGREE OF CORROSION OF THE FRONT LOWER CONTROL ARMS, AND WILL EITHER RUSTPROOF OR REPLACE THEM. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING DECEMBER 2011. OWNERS MAY CONTACT SUBARU AT 1-800-782-2783. OWNERS MAY CONTACT SAAB AT 1-800-955-9007.
AIR BAGS:FRONTAL
ON CERTAIN VEHICLES, THE WIRING HARNESS FOR THE AIR BAG OCCUPANT DETECTION SYSTEM IN THE FRONT PASSENGER SEAT MAY HAVE BEEN PINCHED DURING PRODUCTION. PINCHING OF THE WIRING HARNESS BETWEEN THE FLOOR CROSSMEMBER AND THE SEAT MOUNTING BRACKET COULD RESULT IN A SHORT CIRCUIT.
THE PASSENGER'S FRONT AIR BAG COULD BECOME DISABLED AND MAY NOT DEPLOY IN THE EVENT OF A CRASH INCREASING THE RISK OF INJURY TO THE SEAT OCCUPANT. ALSO AN ELECTRICAL SHORT CIRCUIT COULD CAUSE A FIRE.
DEALERS WILL INSPECT TO SEE IF THE WIRING HAD BEEN INCORRECTLY ROUTED UNDER THE SEAT BRACKET. IF SO, THE DEALER WILL REPAIR ANY DAMAGED WIRING, REROUTE AND SECURE THE WIRING HARNESS IN THE CORRECT LOCATION, AND RE-CALIBRATE THE OCCUPANT DETECTION SYSTEM AS NECESSARY. THE RECALL BEGAN ON MARCH 9, 2007. OWNERS MAY CONTACT SUBARU AT 1-800-782-2783.