2007 Mercury Montego
Vehicle Specs & Maintenance Data
The 2007 Mercury Montego maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mercury Montego.
For oil changes, the 2007 Mercury Montego takes 5W-20 Full Synthetic motor oil with a capacity of 5.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Motorcraft Gold (OAT), and transmission fluid is Mercon LV. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mercury Montego, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There is 1 NHTSA safety recall on file for the 2007 Mercury Montego. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2007 Mercury Montego uses 5W-20 Full Synthetic motor oil (5.5 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2007 Mercury Montego.
No known problems reported for this vehicle yet.
1 NHTSA safety recall for the 2007 Mercury Montego. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
FORD IS RECALLING CERTAIN MODEL YEAR 2007 FORD FIVE HUNDRED AND MERCURY MONTEGO VEHICLES MANUFACTURED FROM SEPTEMBER 5, 2006, THROUGH SEPTEMBER 11, 2006. THE FUEL TANKS MAY NOT HAVE CONSISTENT WELDS BETWEEN THE FUEL TANK AND FUEL FILLER NECK SPUD WHICH CAN AFFECT THE STRENGTH OF THE JOINT. SOME FUEL TANK SPUD WELDS MAY NOT PROVIDE THE EXPECTED STRENGTH IN THE EVENT OF A SEVERE REAR IMPACT TO THE VEHICLE. AN IMPROPER WELD CAN RESULT IN A CRACK IN THE JOINT WHICH COULD ILLUMINATE THE EMISSIONS MALFUNCTION INDICATOR LIGHT, CAUSE A FUEL ODOR, OR ALLOW FUEL TO LEAK OUT.
FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
DEALERS WILL REPLACE THE FUEL TANK FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 16, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.