2008 Chevrolet Uplander
Vehicle Specs & Maintenance Data
The 2008 Chevrolet Uplander maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Chevrolet Uplander.
For oil changes, the 2008 Chevrolet Uplander takes 5W-30 Synthetic Blend motor oil with a capacity of 4.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Chevrolet Uplander, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There is 1 NHTSA safety recall on file for the 2008 Chevrolet Uplander. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2008 Chevrolet Uplander uses 5W-30 Synthetic Blend motor oil (4.5 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2008 Chevrolet Uplander.
No known problems reported for this vehicle yet.
1 NHTSA safety recall for the 2008 Chevrolet Uplander. Check your VIN at NHTSA.gov
SUSPENSION:REAR
THE BRAUN CORPORATION HAS NOTIFIED NHTSA ABOUT A DEFECT IN CERTAIN MODEL YEAR 2005-2008 GENERAL MOTORS MOBILITY CONVERSION, HANDICAPPED ACCESSIBLE LOW FLOOR MINIVANS. DURING CONVERSION, THE DRIVER OR PASSENGER SIDE TRAILING ARM MODIFICATION MAY NOT HAVE BEEN ADEQUATELY WELDED.
A SQUEAKING OR CLUNKING NOISE MAY DEVELOP. THE TRAILING ARM BUSHINGS MAY PREMATURELY WEAR AND THE TRAILING ARM MAY FRACTURE OR SEPARATE, ALLOWING THE REAR AXLE TO BECOME PARTIALLY SEPARATED FROM THE CHASSIS INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT AND WILL HAVE A SUPPLY OF RETROFIT PARTS AVAILABLE TO REMEDY THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 4, 2010. OWNERS MAY CONTACT BRAUN AT 1-800-488-0359.