2010 Lexus Ls460
Vehicle Specs & Maintenance Data
The 2010 Lexus Ls460 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Lexus Ls460.
For oil changes, the 2010 Lexus Ls460 takes 0W-20 Full Synthetic motor oil with a capacity of 8.2 quarts. Brake fluid type is DOT 3, the recommended coolant is Pink Long Life Coolant (OAT), and transmission fluid is ATF WS. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Lexus Ls460, torque the lug nuts to 103 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2010 Lexus Ls460. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2010 Lexus Ls460 uses 0W-20 Full Synthetic motor oil (8.2 qt capacity), requires lug nuts torqued to 103 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2010 Lexus Ls460.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2010 Lexus Ls460. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2007-2010 Lexus LS vehicles manufactured May 9, 2006, to July 20, 2010, 2006-2011 Lexus GS vehicles manufactured January 6, 2005, to September 10, 2010, and 2006-2011 Lexus IS vehicles manufactured August 30, 2005, to September 10, 2010. Due to anti-corrosion plating remnants, fuel may leak from where the fuel pressure sensor is attached to the fuel delivery pipe.
A fuel leak in the presence of an ignition source increases the risk of a fire.
Toyota will notify owners, and dealers will clean and reseal the fuel pressure sensor mounting area, free of charge. The recall began March 3, 2015. Owners may contact Toyota customer service at 1-800-331-4331.
STEERING:ELECTRIC POWER ASSIST SYSTEM
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 LEXUS LS460 AND LS600 VEHICLES MANUFACTURED FROM AUGUST 20, 2009 THROUGH MAY 13, 2010. A PROGRAMMING CHANGE OF THE STEERING CONTROL ECU FOR THE VARIABLE GEAR RATIO STEERING (VGRS) SYSTEM CAN CAUSE IMPROPER ACTIVATION OF THE STEERING SYSTEM PROTECTION LOGIC DESIGNED TO PROTECT THE SYSTEM WHEN LARGER THAN NORMAL STEERING INPUTS ARE APPLIED AT A FULLY TURNED POSITION.
IMPROPER ACTIVATION OF THE STEERING SYSTEM PROTECTION LOGIC CAN CAUSE THE STEERING WHEEL TO BECOME OFF-CENTERED UP TO 90 DEGREES. THIS MAY OCCUR AFTER THE DRIVER HAS FULLY TURNED THE STEERING WHEEL IN ONE DIRECTION THEN QUICKLY ATTEMPTS TO TURN IT BACK TO THE CENTER POSITION. SHOULD THIS OCCUR WHILE DRIVING, THE RISK OF A CRASH IS INCREASED.
TOYOTA WILL NOTIFY OWNERS AND LEXUS DEALERS WILL REPLACE THE STEERING CONTROL ECU FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 12, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.