2010 Mazda Tribute
Vehicle Specs & Maintenance Data
The 2010 Mazda Tribute maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mazda Tribute.
For oil changes, the 2010 Mazda Tribute takes 0W-20 Full Synthetic motor oil with a capacity of 4.8 quarts. Brake fluid type is DOT 3, the recommended coolant is FL22 Long Life Coolant (Green), and transmission fluid is Mazda ATF FZ. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mazda Tribute, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2010 Mazda Tribute. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2010 Mazda Tribute uses 0W-20 Full Synthetic motor oil (4.8 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2010 Mazda Tribute.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2010 Mazda Tribute. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Mazda North American Operations (Mazda) is recalling certain model year 2010-2011 Tribute vehicles manufactured March 3, 2009, to May 26, 2011. On vehicles with a 3.0L engine, the Fuel Delivery Module (FDM) may crack, causing a fuel leak.
A fuel leak in the presence of an ignition source increases the risk of a fire.
Mazda will notify owners, and dealers will replace the FDM flange with one that has a redesigned fuel supply port, free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety recall were mailed on December 23, 2016. Owners will receive a second notice when remedy parts are in stock. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0416J.
SUSPENSION:FRONT:WHEEL BEARING
The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.
Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.
Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.
STEERING:ELECTRIC POWER ASSIST SYSTEM
Mazda North American Operations (Mazda) is recalling certain model year 2008-2011 Tribute vehicles manufactured October 5, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist.
If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
Mazda will notify owners and dealers will update the software for the power steering control module (PSCM) and the instrument cluster module, free of charge. If a vehicle shows a history of a loss of the torque sensor signal or fault codes relating to the PSCM when the vehicle is brought in for the recall remedy, the affected components will be replaced, free of charge. The recall began in July 2014. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 7614E.