2010 Mitsubishi Endeavor
Vehicle Specs & Maintenance Data
The 2010 Mitsubishi Endeavor maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mitsubishi Endeavor.
For oil changes, the 2010 Mitsubishi Endeavor takes 5W-30 motor oil with a capacity of 4.8 quarts. Brake fluid type is DOT 3, the recommended coolant is Dia Queen Super Long Life Coolant (Green), and transmission fluid is Diamond ATF SP-III. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mitsubishi Endeavor, torque the lug nuts to 65-80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2010 Mitsubishi Endeavor. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2010 Mitsubishi Endeavor uses 5W-30 motor oil (4.8 qt capacity), requires lug nuts torqued to 65-80 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2010 Mitsubishi Endeavor.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2010 Mitsubishi Endeavor. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
MITSUBISHI IS RECALLING CERTAIN MODEL YEAR 2004-2010 ENDEAVOR VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND WASHINGTON D.C. COLD STATES INCLUDE NORTH DAKOTA, SOUTH DAKOTA, NEBRASKA, KANSAS, OKLAHOMA, COLORADO, WYOMING, MONTANA, IDAHO, WASHINGTON, OREGON, AND UTAH. ADJOINING STATES INCLUDE ARKANSAS, TENNESSEE, AND NORTH CAROLINA. IN SEVERE CORROSIVE ENVIRONMENTS WHERE ROAD SALTS ARE FREQUENTLY USED IN WINTER VEHICLES MAY BE EXPOSED TO ROAD DEBRIS (MUD) MIXED WITH ROAD SALT. THIS MATERIAL CAN BECOME TRAPPED BETWEEN A REINFORCING BRACKET AND THE FUEL FILLER PIPE, POTENTIALLY CAUSING CORROSION. OVER TIME, CORROSION COULD CREATE A LEAK IN THE FUEL FILLER PIPE THAT COULD RESULT IN A FUEL LEAKAGE WHEN FUELING THE VEHICLE.
FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.
DEALERS WILL REPLACE THE FUEL FILLER PIPE WITH A NEW IMPROVED PART FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE JULY 5, 2010. OWNERS MAY CONTACT MITSUBISHI AT 1-800-222-0037.
AIR BAGS
MITSUBISHI MOTORS NORTH AMERICA, INC. (MMNA) IS RECALLING CERTAIN MODEL YEAR 2010 ENDEAVOR MODEL VEHICLES MANUFACTURED BETWEEN MAY 26 AND JULY 28, 2009. THE RETAINER BRACKET USED FOR THE SEAT-MOUNTED SIDE AIRBAG FRAMES ON BOTH THE DRIVER AND FRONT PASSENGER SEATS MAY NOT HAVE BEEN PROPERLY WELDED.
IF THIS CONDITION EXISTS, THE FRONT SEAT-MOUNTED AIRBAGS MAY NOT DEPLOY CORRECTLY IN A SIDE IMPACT CRASH, POSSIBLY RESULTING IN INJURY TO THE SEAT OCCUPANT.
MMNA WILL NOTIFY OWNERS AND DEALERS WILL INSPECT THE WELD CONDITION OF THE SIDE AIRBAG RETAINER BRACKET ON THE FRONT PASSENGER SEATS. IF THE WELD IS INSUFFICIENT, THE DEALER WILL REPLACE THE SEATBACK ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 30, 2009. OWNERS MAY CONTACT MITSUBISHI CUSTOMER RELATIONS DEPARTMENT AT 1-888-648-7820.