2011 Saab 9-3

Vehicle Specs & Maintenance Data

Engine
1.8L I4
Oil Type & Capacity
5W-30 Full Synthetic (4 qts)
Transmission
Automatic 4-spd
Wheel Torque
80
ft-lbs

The 2011 Saab 9-3 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Saab 9-3.

For oil changes, the 2011 Saab 9-3 takes 5W-30 Full Synthetic motor oil with a capacity of 4 quarts. Brake fluid type is DOT 4, the recommended coolant is Dex-Cool (OAT), and transmission fluid is Dexron VI. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Saab 9-3, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

Owners of the 2011 Saab 9-3 have reported 5 common issues including "Ignition Cassette (DI Cassette) Failure", "Crankshaft Position Sensor Failure — Sudden Stalling" and "Throttle Body Failure and Limp Mode". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.

There are 4 NHTSA safety recalls on file for the 2011 Saab 9-3. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2011 Saab 9-3 uses 5W-30 Full Synthetic motor oil (4 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 4 brake fluid.

2011 Saab 9-3 Specifications
Motor Oil5W-30 Full Synthetic
Oil Capacity4 qt
Lug Nut Torque80 ft-lbs
Brake FluidDOT 4
CoolantDex-Cool (OAT)
Transmission FluidDexron VI
Transmission Fluid
Fluid Type
Dexron VI
Shop
Coolant
Fluid Type
Dex-Cool (OAT)
Shop
Brake Fluid
Fluid Type
DOT 4
Shop
Washer Fluid
Windshield
Shop

Manufacturer-recommended maintenance schedule for the 2011 Saab 9-3. Always verify intervals against your owner's manual.

Service Item
Interval
Engine Oil & Filter
7,500 mi / 12 mo
5W-30 dexos1; ~5.8 qt (B207 2.0T)
Tire Rotation
7,500 mi
Cabin Air Filter
15,000 mi / 24 mo
Engine Air Filter
30,000 mi / 36 mo
Brake Fluid
24 mo
DOT 4
Transmission Fluid
60,000 mi
Aisin 5-speed auto or 6MT
Coolant
100,000 mi / 60 mo
Spark Plugs
60,000 mi
Timing Chain
100,000 mi
Chain-driven; inspect tensioner at 80k
Serpentine Belt
50,000 mi
Battery
60 mo
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2011 Saab 9-3.

Common problems reported by 2011 Saab 9-3 owners, with recommended fixes and estimated repair costs.

1

Ignition Cassette (DI Cassette) Failure

The Saab 9-3's direct ignition (DI) cassette is the single most common failure on this vehicle. The cassette contains all four ignition coils and sits directly on top of the spark plugs. It fails due to heat stress and internal insulation breakdown, causing misfires, rough running, check engine light, and reduced power. Some owners go through multiple cassettes over the vehicle's life.

Solution

Replace the direct ignition cassette with an OEM or quality aftermarket unit. Replace the spark plugs at the same time. The updated cassette (Saab part 12787707 or equivalent) has improved heat resistance. Running the engine with a failing cassette can damage the catalytic converter from unburned fuel.

Est. Cost: $200 - $500 (parts and labor)
2

Crankshaft Position Sensor Failure — Sudden Stalling

The crankshaft position sensor (CKP) fails without warning, causing the engine to stall suddenly while driving with no ability to restart. The sensor provides the primary timing reference for the engine control module, and its failure leaves the ECM unable to fire the ignition or fuel injectors. There is often no preceding warning light or drivability issue.

Solution

Replace the crankshaft position sensor. The sensor is located on the front of the engine near the crankshaft pulley and is relatively accessible. Use an OEM-quality replacement sensor, as cheap aftermarket sensors have a high failure rate on Saab engines. Keep a spare sensor in the vehicle as a precautionary measure.

Est. Cost: $100 - $300
3

Throttle Body Failure and Limp Mode

The electronic throttle body develops internal motor or position sensor faults, causing the engine to enter limp mode with severely reduced power. A 'Reduced Engine Power' message appears on the instrument cluster. The throttle body may also cause erratic idle speed, surging, and hesitation during acceleration. The issue is more common in high-mileage vehicles.

Solution

Replace the electronic throttle body. The engine control module must relearn the idle parameters after installation, which requires a specific relearn procedure using a Tech 2 diagnostic tool or compatible scan tool. The intake manifold and air filter should be inspected and cleaned during the repair.

Est. Cost: $300 - $700
4

Neutral Safety Switch and Transmission Range Sensor Failure

The neutral safety switch (also called the transmission range sensor) on automatic transmission models fails, preventing the engine from starting or causing it to start in gear. In some cases, the gear indicator on the dash displays the wrong gear, and the reverse lights may not function. The switch is exposed to road spray and corrodes over time.

Solution

Replace the neutral safety switch / transmission range sensor. The connector should be inspected for corrosion and cleaned with electrical contact cleaner. Adjust the switch to the correct position using the alignment tool during installation. A Tech 2 relearn procedure may be needed to clear transmission fault codes.

Est. Cost: $200 - $500
5

SID (Saab Information Display) Pixel Failure

The SID display located between the gauges progressively loses pixel rows, making it impossible to read important vehicle information such as gear selection, odometer, trip computer data, and warning messages. The issue is caused by degrading ribbon cable connections between the LCD panel and the circuit board inside the display unit.

Solution

The SID unit can be removed and sent to a specialist repair shop that resolders the ribbon cable connections to the LCD panel. Alternatively, a rebuilt or new SID unit can be installed. Some owners use aftermarket SID repair kits with new ribbon cables. The repair requires removing the instrument cluster surround.

Est. Cost: $100 - $250 (ribbon cable repair) / $200 - $500 (replacement SID unit)

4 NHTSA safety recalls for the 2011 Saab 9-3. Check your VIN at NHTSA.gov

1

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Campaign: 16V063000 Date: 03/02/2016

General Motors LLC (GM) is recalling certain model year 2006-2011 Saab 9-3 vehicles manufactured May 31, 2002, to February 15, 2011, 2006-2009 Saab 9-5 vehicles manufactured June 7, 2005, to May 28, 2009, and 2008-2009 Saturn Astra vehicles manufactured April 11, 2007, to July 24, 2008. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

Consequence

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

Remedy

GM will notify owners, and dealers will replace the driver's frontal air bag inflator on Saab 9-3 and 9-5 vehicles and will replace the driver's frontal airbag module on Saturn Astra vehicles, free of charge. The recall began on March 1, 2017. Owners may contact Saab customer service at 1-800-955-9007 or Saturn customer service at 1-800-553-6000. GM's number for this recall is 28810.

2

SEAT BELTS:FRONT:RETRACTOR

Campaign: 14V318000 Date: 12/06/2014

General Motors LLC (GM) is recalling certain model year 2004-2011 Saab 9-3 Convertible vehicles manufactured July 30, 2003, to February 15, 2011. In the affected vehicles, the driver's side front seat belt retractor may break, causing the seat belt webbing not to retract.

Consequence

In the event of a crash, a seat belt that has not retracted may not properly restrain the seat occupant, increasing their risk of injury.

Remedy

GM will notify owners, and dealers will replace the driver's seat belt retractor, free of charge. The recall began on October 6, 2015. Owners may contact Saab customer service at 1-800-955-9007. GM's number for this recall is 14222. Note: Special Coverage 10086 will replace the passenger side seat belt retractor if it fails, free of charge, for the life of the vehicle.

3

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Campaign: 11E009000 Date: 28/02/2011

TI AUTOMOTIVE IS RECALLING CERTAIN FUEL PUMPS, PART NUMBERS TU456 AND TU303, SOLD UNDER VARIOUS BRAND NAMES AS AFTERMARKET AND REPLACEMENT EQUIPMENT FOR THE MOTOR VEHICLES LISTED ABOVE. THE DEFECTIVE FUEL PUMP MAY SEIZE, STOPPING THE FUEL FLOW TO THE ENGINE CREATING A STALLING CONDITION.

Consequence

A VEHICLE CRASH COULD OCCUR SHOULD THE ENGINE STALL WHILE IN USE.

Remedy

TI AUTOMOTIVE WILL NOTIFY OWNERS OF RECORD AND WILL REPLACE ANY DEFECTIVE FUEL PUMP WITH A NEW OR REWORKED FUEL PUMP FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 22, 2011. OWNERS MAY CONTACT TI AUTOMOTIVE AT 1-866-867-3759 OR LOG ON TO WWW.RECALLRESPONSE.COM.

4

FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP

Campaign: 11V015000 Date: 19/01/2011

SAAB IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 PASSENGER VEHICLES MANUFACTURED FROM JUNE 2010 THROUGH DECEMBER 2010. CERTAIN FUEL PUMPS INSTALLED AS ORIGINAL EQUIPMENT MAY HAVE INTERNAL COMPONENTS WITH INCORRECT SPECIFICATIONS.

Consequence

THE SUBJECT FUEL PUMPS CAN SEIZE CAUSING THE ENGINE TO STALL WHICH INCREASES THE RISK OF A CRASH.

Remedy

SAAB WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMPS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 3, 2011. OWNERS MAY CONTACT SAAB AT 1-800-955-9007.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
9-3 — Other Model Years
2010200920082007200620052004200320022001
See Also
2011 Saab 9-3 Lug Nut TorqueBest Oil for 2011 Saab 9-3All Vehicles Using 5W-30 Full Synthetic OilAll Vehicles Using DOT 4Oil Change Guide: 2011 Saab 9-3Wiper Replacement: 2011 Saab 9-3