2012 Porsche Cayman
Vehicle Specs & Maintenance Data
The 2012 Porsche Cayman maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Porsche Cayman.
For oil changes, the 2012 Porsche Cayman takes 0W-40 Full Synthetic motor oil with a capacity of 8.5 quarts. Brake fluid type is DOT 4, the recommended coolant is G13 (Purple, phosphate-free), and transmission fluid is VW G 055 025 A2. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Porsche Cayman, torque the lug nuts to 118 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There is 1 NHTSA safety recall on file for the 2012 Porsche Cayman. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2012 Porsche Cayman uses 0W-40 Full Synthetic motor oil (8.5 qt capacity), requires lug nuts torqued to 118 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2012 Porsche Cayman.
No known problems reported for this vehicle yet.
1 NHTSA safety recall for the 2012 Porsche Cayman. Check your VIN at NHTSA.gov
SEAT BELTS
PORSCHE IS RECALLING CERTAIN MODEL YEAR 2011 911 SPEEDSTER AND 911 GTS RS 4.0; AND MODEL YEAR 2012 BOXSTER (INCLUDING S AND SPYDER); CAYMAN (INCLUDING S AND R); 911 CARRERA (INCLUDING S, GTS, 4, 4S, AND 4 GTS); 911 TARGA 4 AND TARGA 4S; AND 911 TURBO AND TURBO S MODELS MANUFACTURED FROM MAY 31, 2011, THROUGH JUNE 10, 2011. THERE IS A POSSIBILITY THAT THE MOUNTING HOLES IN THE SEAT BELT ANCHOR PLATES FITTED TO THE VEHICLE ARE TOO SMALL. IF THE HOLE DIAMETER IS TOO SMALL, THE ANCHOR PLATE MAY NOT BE ABLE TO ROTATE ABOUT THE FASTENING BOLT AS DESIGNED.
SHOULD THIS OCCUR, THE SEAT BELT MAY NOT BE ROUTED OPTIMALLY AROUND THE OCCUPANT, OR MAY POTENTIALLY LOOSEN AT SOME POINT IN THE FUTURE INCREASING THE RISK OF INJURY DURING A CRASH.
PORSCHE WILL NOTIFY OWNERS, AND DEALERS WILL INSPECT THE SEAT BELT ANCHORS AND, IF NECESSARY, REPLACE THE SEAT BELT. THE REPAIRS WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 2, 2011. OWNERS MAY CONTACT PORSCHE AT 1-800-767-7243.