2013 Aston Martin Virage
Vehicle Specs & Maintenance Data
The 2013 Aston Martin Virage maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Aston Martin Virage.
For oil changes, the 2013 Aston Martin Virage takes 5W-40 Full Synthetic motor oil with a capacity of 10.5 quarts. Brake fluid type is DOT 4, the recommended coolant is OAT Coolant (Red), and transmission fluid is ZF Lifeguard 8 (ATF). Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Aston Martin Virage, torque the lug nuts to 60-133 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2013 Aston Martin Virage. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2013 Aston Martin Virage uses 5W-40 Full Synthetic motor oil (10.5 qt capacity), requires lug nuts torqued to 60-133 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2013 Aston Martin Virage.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2013 Aston Martin Virage. Check your VIN at NHTSA.gov
SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER
Aston Martin Lagonda of North America (Aston Martin) is recalling certain model year 2006-2014 DB9, V12 Vantage, V8 Vantage, DBS, and Virage vehicles manufactured July 3, 2006, to November 5, 2014. In the affected vehicles, the electronic control module for the driver and front passenger seat heaters may fail, preventing the seat heaters from being able to be turned off.
If the electronic control module fails, the seat heater could get hot enough that areas of the seat may overheat and smolder, increasing the risk of injury to the seat occupant.
Aston Martin will notify owners, and dealers will install an additional module to the circuit that can interrupt the power to the seat heaters in case the electronic control module for the seat heaters fails, free of charge. The recall began in January 2015. Owners may contact Aston Martin Customer Service by calling 1-888-923-9988. Aston Martin's number for this recall is RA-01-0019.
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
Aston Martin is recalling certain model year DB9, Virage, V8 Vantage, V12 Vantage, and Rapide vehicles manufactured from May 14, 2012, through April 10, 2013. Due to a manufacturing error, the throttle pedal arm may break.
If the throttle pedal arm breaks, the engine will return to idle and the driver will be unable to maintain or increase engine speed, increasing the risk of a crash.
Aston Martin will notify owners, and dealers will replace the throttle pedal assemblies. The recall began July 19, 2013. Owners may contact Aston Martin customer service by calling 1-888-923-9988. Aston Martin's recall number is RA-03-0016.