2013 Nissan Xterra
Vehicle Specs & Maintenance Data
The 2013 Nissan Xterra maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Xterra.
For oil changes, the 2013 Nissan Xterra takes 5W-30 Full Synthetic motor oil with a capacity of 5.6 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Xterra, torque the lug nuts to 98 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2013 Nissan Xterra have reported 5 common issues including "Radiator/Transmission Cooler Mixing (SMOD/Strawberry Milkshake)", "Timing Chain Tensioner and Guide Failure" and "Automatic Transmission Cooling Line Leaks". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2013 Nissan Xterra uses 5W-30 Full Synthetic motor oil (5.6 qt capacity), requires lug nuts torqued to 98 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2013 Nissan Xterra. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2013 Nissan Xterra.
Common problems reported by 2013 Nissan Xterra owners, with recommended fixes and estimated repair costs.
Radiator/Transmission Cooler Mixing (SMOD/Strawberry Milkshake)
The internal automatic transmission fluid cooler inside the radiator can develop an internal crack, allowing coolant to mix with transmission fluid and vice versa. This produces a pink or strawberry-milkshake-colored fluid in the radiator and transmission. This issue, known as SMOD (Secondary Method of Death), can destroy the transmission if not caught early.
Replace the factory radiator with an aftermarket unit that does not have an integrated transmission cooler and install a standalone external transmission cooler. If coolant has already entered the transmission, a complete transmission flush or replacement may be required. Nissan extended the powertrain warranty on affected 2005-2010 models but 2012 models are not officially covered.
Est. Cost: $500 - $4,500Timing Chain Tensioner and Guide Failure
The VQ40DE engine's primary timing chain tensioner and plastic chain guides can fail, causing timing chain rattle, especially on cold starts. If the guides break apart, loose plastic pieces can clog the oil pickup screen, leading to oil starvation and catastrophic engine failure. This is a well-documented issue on the VQ40 engine family.
Replace the timing chain, tensioners, and all chain guides with updated Nissan parts. This is a significant job that requires removing the front cover of the engine. Use OEM or high-quality aftermarket components. Regular oil changes with quality synthetic oil help extend component life. TSB NTB09-051A references related concerns.
Est. Cost: $1,500 - $3,000Automatic Transmission Cooling Line Leaks
The automatic transmission fluid cooling lines running from the transmission to the radiator can develop leaks at the crimped fittings and rubber hose connections. ATF drips onto the exhaust, creating a burning smell and fire risk. Low ATF levels from undetected leaks accelerate transmission wear.
Replace the transmission cooling lines with updated Nissan OEM lines or fabricate custom lines using high-quality AN fittings and braided stainless hose. Inspect the lines regularly as part of routine maintenance, particularly at the rubber-to-metal junction points.
Est. Cost: $200 - $600Rear Axle Seal Leak
The rear axle seals can develop leaks, allowing differential fluid to seep onto the rear brake components. This causes a burning smell, contaminated brake pads, reduced rear braking performance, and a visible oil residue on the rear wheels and brake backing plates.
Replace both rear axle seals, which requires removing the axle shafts. Inspect and replace the rear brake pads and rotors if they have been contaminated with differential fluid, as oil-soaked brake friction material cannot be cleaned and must be replaced.
Est. Cost: $400 - $900Exhaust Manifold Cracking and Leak
The cast iron exhaust manifolds on the VQ40DE can develop cracks due to repeated thermal cycling, causing an exhaust leak that produces a ticking noise on cold start that may diminish as the engine warms. Over time, the leak worsens and can trigger check engine light codes for oxygen sensor readings.
Replace the cracked exhaust manifold with a new OEM or aftermarket unit. Inspect the exhaust manifold studs as they are prone to seizing and breaking during removal. Some owners opt for aftermarket headers as a more durable and performance-oriented replacement.
Est. Cost: $500 - $1,500