2014 Infiniti Qx80
Vehicle Specs & Maintenance Data
The 2014 Infiniti Qx80 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Infiniti Qx80.
For oil changes, the 2014 Infiniti Qx80 takes 5W-30 Full Synthetic motor oil with a capacity of 6.4 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Infiniti Qx80, torque the lug nuts to 98 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2014 Infiniti Qx80. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2014 Infiniti Qx80 uses 5W-30 Full Synthetic motor oil (6.4 qt capacity), requires lug nuts torqued to 98 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2014 Infiniti Qx80.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2014 Infiniti Qx80. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.
A fuel leak in the presence of an ignition source could cause a vehicle fire.
Nissan will notify owners, and dealers will re-torque the fuel pressure sensors free of charge. The recall began on January 25, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Nissan North America, Inc. (Nissan) is recalling certain model year 2013 Infiniti QX56 vehicles manufactured September 1, 2012, to April 26, 2013, and 2014 Infiniti QX80 vehicles manufactured June 18, 2013, to February 11, 2014. In the affected vehicles, the driver's frontal air bag inflator may have been manufactured with an incorrect part.
In the event of a crash necessitating deployment of the driver's air bag, the incorrect part may block the flow of propellant to the air bag and the air bag's inflator may rupture. The rupture could cause metal fragments to strike and potentially seriously injure the vehicle occupants.
Nissan will notify owners, and dealers will replace the front driver air bag inflator, free of charge. The recall began on December 1, 2014. Owners may contact Nissan customer service at 1-800-647-7261.
EQUIPMENT:OTHER:LABELS
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Infiniti QX80 vehicles manufactured December 2, 2013, through January 27, 2014, and equipped with 20 inch wheels. In the affected vehicles, the Certification label incorrectly lists the Gross Axle Weight Rating (GAWR) as 4,497 lb instead of the correct 4,343 lb. As such, the vehicles do not comply with Part 567 "Certification Regulation."
An incorrect GAWR listing may result in the vehicle being overloaded which may increase the risk of a crash.
Nissan will notify owners, and will mail owners a corrected Certification label, free of charge. The recall began on April 21, 2014. Owners may contact Infiniti at 1-800-662-6200.