2016 Mazda Mazda3
Vehicle Specs & Maintenance Data
The 2016 Mazda Mazda3 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mazda Mazda3.
For oil changes, the 2016 Mazda Mazda3 takes 0W-20 Full Synthetic motor oil with a capacity of 4.8 quarts. Brake fluid type is DOT 3, the recommended coolant is FL22 Long Life Coolant (Green), and transmission fluid is Mazda ATF FZ. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mazda Mazda3, torque the lug nuts to 80-108 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 6 NHTSA safety recalls on file for the 2016 Mazda Mazda3. At least one is flagged as "Park It," meaning you should not drive the vehicle until the recall repair is completed. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2016 Mazda Mazda3 uses 0W-20 Full Synthetic motor oil (4.8 qt capacity), requires lug nuts torqued to 80-108 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2016 Mazda Mazda3.
No known problems reported for this vehicle yet.
6 NHTSA safety recalls for the 2016 Mazda Mazda3. Check your VIN at NHTSA.gov
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
Park ItMazda North American Operations (Mazda) is recalling certain model year 2015-2016 Mazda3 vehicles manufactured May 21, 2015, to August 25, 2015. The affected vehicles are equipped with a fuel tank with a shut-off valve that can allow fuel to enter into the fuel tank emissions systems. If enough fuel enters the emission system it may leak out onto the ground or result in an engine stall.
A fuel leak in the presence of an ignition source increases the risk of a fire. An engine that stalls increases the risk of a crash.
Mazda will notify owners, and dealers will inspect the vehicle's fuel shut-off valve. As needed, the fuel shut-off valve and the affected fuel tank emissions system components will be replaced, free of charge. The recall began on October 20, 2015. Owners are advised not to drive their vehicle until the repairs have been completed. Mazda will provide rental cars until that time. Owners may contact the Mazda Customer Experience Center at 1-800- 222-5500, option #6. Mazda's number for this recall is 8615J.
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.
VISIBILITY:WINDSHIELD WIPER/WASHER
Mazda North American Operations (Mazda) is recalling certain 2016-2018 Mazda3 vehicles. A defective windshield wiper relay may cause the windshield wipers to become inoperative, reducing the driver's visibility.
Reduced visibility while driving can increase the risk of crash.
Mazda will notify owners, and dealers will replace the front body control module with a new module which uses an improved wiper relay design, free of charge. The recall began May 7, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 3219D.
PARKING BRAKE
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda6 and 2014-2016 Mazda3 vehicles. Water could possibly enter the brake caliper causing the parking brake actuator shaft to corrode and possibly bind.
If the parking brake actuator shaft binds, the parking brake may not engage or disengage fully. If the parking brake does not engage properly, the vehicle may move unexpectedly if it is parked on a slope, increasing the risk of a crash.
Mazda will notify owners, and dealers will check the parking brake actuator shafts, replacing any that are corroded, free of charge. Remedy parts are currently unavailable. Interim notices informing owners of the safety risk were mailed August 24, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1217F.
FUEL SYSTEM, GASOLINE:STORAGE
Mazda North American Operations (Mazda) is recalling certain model year 2016 Mazda3 vehicles manufactured September 24, 2015, to October 16, 2015. During manufacturing, the fuel tanks for the affected vehicles may have deformed, resulting in a fuel leak from the recirculation pipe welded connection.
A fuel leak in the presence of an ignition source increases the risk of a fire.
Mazda will notify owners, and depending on the tank lot number, dealers will inspect the recirculation pipe weld, replacing the fuel tank, as necessary, free of charge. The recall began November 1, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0216I.
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
Mazda Motors North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda3 vehicles manufactured January 4, 2014, to September 18, 2015. The fuel tank of the affected vehicles may have been improperly handled during manufacturing and, as a result, the welded attachment of the Inlet Check Valve (ICV) may fail and allow fuel to leak.
A fuel leak in the presence of an ignition source increases the risk of a fire.
Mazda will notify owners, and depending on the tank lot number, dealers will inspect the ICV weld, replacing the fuel tank, as necessary, free of charge. The recall began November 1, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0116I.