2017 Nissan Juke
Vehicle Specs & Maintenance Data
The 2017 Nissan Juke maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Juke.
For oil changes, the 2017 Nissan Juke takes 0W-20 Full Synthetic motor oil with a capacity of 3.7 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan NS-3. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Juke, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2017 Nissan Juke have reported 5 common issues including "CVT Transmission Failure", "Turbocharger Failure" and "Timing Chain Stretch and Rattle". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2017 Nissan Juke uses 0W-20 Full Synthetic motor oil (3.7 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2017 Nissan Juke. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2017 Nissan Juke.
Common problems reported by 2017 Nissan Juke owners, with recommended fixes and estimated repair costs.
CVT Transmission Failure
The Jatco CVT used in the Juke is prone to premature failure, exhibiting symptoms such as shuddering during acceleration, delayed engagement, overheating, and complete loss of drive. The transmission may enter limp mode with a warning light. Failures are common between 60,000 and 100,000 miles.
Perform a CVT fluid drain and refill with Nissan NS-3 CVT fluid and TCM reprogram as a first step per TSB NTB14-012. If degradation is advanced, the CVT valve body or complete transmission assembly must be replaced. Nissan extended the CVT warranty to 10 years/120,000 miles on some model years.
Est. Cost: $300 - $5,000Turbocharger Failure
The 1.6L MR16DDT turbocharged engine can experience turbo failure, typically from oil starvation to the turbo bearings. Symptoms include excessive oil consumption, blue or white smoke from the exhaust, loss of boost pressure, and a whining or grinding noise from the turbo. The oil feed line to the turbo can become restricted with carbon buildup.
Replace the turbocharger assembly and inspect the oil feed and return lines for blockage. Clean or replace the oil feed line. Ensure the engine is running the correct oil specification (0W-20 full synthetic) and change intervals are short (5,000 miles or less). Some owners install an aftermarket oil catch can to reduce carbon buildup.
Est. Cost: $1,500 - $3,500Timing Chain Stretch and Rattle
The MR16DDT engine's timing chain can stretch prematurely, particularly if oil change intervals are not strictly maintained. Symptoms include a rattling noise on cold start, rough idle, check engine light with camshaft correlation codes (P0014, P0024), and in severe cases, timing chain skip causing engine damage.
Replace the timing chain, chain guides, and both tensioners. This is a significant repair that requires engine front disassembly. Ensure the updated chain tensioner design is used for the replacement. Regular oil changes with quality synthetic oil every 5,000 miles help prevent recurrence.
Est. Cost: $1,200 - $2,500AC Compressor and Condenser Failure
The AC compressor can fail prematurely, causing loss of cold air. Additionally, the AC condenser located behind the front bumper is vulnerable to road debris damage, causing refrigerant leaks. Some owners report the system intermittently blowing warm air even before complete failure.
Replace the AC compressor, receiver/drier, and expansion valve as a system. If the condenser is damaged, replace it as well and flush the entire system to remove debris. Have the system evacuated, leak tested, and recharged with the correct amount of R-134a refrigerant.
Est. Cost: $800 - $2,000Fuel Injector and Carbon Buildup
As a direct-injection engine, the MR16DDT is susceptible to significant carbon buildup on the intake valves, causing rough idle, misfires, hesitation, and reduced fuel economy. Fuel injectors can also become clogged or develop leaks over time, contributing to poor engine performance and hard starting.
Perform walnut shell blasting or chemical cleaning of the intake valves to remove carbon deposits. Replace faulty fuel injectors with updated Nissan OEM units. Installing an aftermarket oil catch can helps slow future carbon accumulation. Some owners add intake valve cleaning to their regular maintenance schedule every 30,000 miles.
Est. Cost: $400 - $1,200