2017 Nissan Versa
Vehicle Specs & Maintenance Data
The 2017 Nissan Versa maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Versa.
For oil changes, the 2017 Nissan Versa takes 0W-20 Full Synthetic motor oil with a capacity of 3.7 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Versa, torque the lug nuts to 83 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2017 Nissan Versa. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2017 Nissan Versa uses 0W-20 Full Synthetic motor oil (3.7 qt capacity), requires lug nuts torqued to 83 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2017 Nissan Versa.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2017 Nissan Versa. Check your VIN at NHTSA.gov
ELECTRICAL SYSTEM:IGNITION
Nissan North America, Inc. (Nissan) is recalling certain 2017 Nissan NV200, Sentra, NV3500 Van, NV3500 Bus, NV200 Taxi, NV1500, NV2500 Van, Chevrolet City Express, 2017-2018 Frontier, Versa Note, and Versa Sedan vehicles that have a mechanical (physical) key ignition system. In these models, over time, the weight on the key ring and road conditions or some other jarring event may cause the ignition switch to move out of the run position to the accessory position, turning off the engine.
If the vehicle stalls, it can increase the risk of a crash.
Nissan will notify owners, and dealers will inspect the production information on the ignition switch, and replace it as necessary, free of charge. The recall began October 1, 2018. Owners may contact Nissan customer service at 1-800-867-7669.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Nissan North America, Inc. (Nissan) is recalling certain 2017 Versa, and Versa Note vehicles. The ring plate that secures the air bag cushion to the passenger frontal air bag assembly may fail, possibly causing the air bag to deploy improperly in the event of a crash.
In the event of a crash, if the passenger frontal air bag does not deploy as intended, it can increase the risk of injury.
Nissan will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began June 12, 2016. Owners may contact Nissan customer service at 1-800-647-7261.
AIR BAGS:SIDE/WINDOW
Nissan North America, Inc. (Nissan) is recalling certain model year 2017 Versa vehicles manufactured August 1, 2016, to August 16, 2016. A seam in the fabric section of the side curtain air bags may tear during side curtain air bag deployment, potentially affecting the performance of the air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 226, "Ejection Mitigation", and number 214, "Side Impact Protection."
In the event of a crash necessitating side curtain air bag deployment, if the side curtain air bags do not deploy as intended there would be an increased risk of injury.
Nissan will notify owners, and dealers will replace the left and right side curtain air bags, free of charge. The recall began on December 2, 2016. Owners may contact Nissan customer service at 1-800-647-7261.