2017 Toyota Tundra

Vehicle Specs & Maintenance Data

Engine Size
Engine
4.6L V8
Oil Type & Capacity
0W-20 Full Synthetic (7 qts)
Transmission
Automatic (S6)
Wheel Torque
97
ft-lbs

The 2017 Toyota Tundra maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Toyota Tundra.

For oil changes, the 2017 Toyota Tundra takes 0W-20 Full Synthetic motor oil with a capacity of 7 quarts. Brake fluid type is DOT 3, the recommended coolant is Pink Long Life Coolant (OAT), and transmission fluid is ATF WS. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.

When mounting wheels on the Toyota Tundra, torque the lug nuts to 97 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.

There are 6 NHTSA safety recalls on file for the 2017 Toyota Tundra. Check the Recalls tab below for full details.

Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.

The 2017 Toyota Tundra uses 0W-20 Full Synthetic motor oil (7 qt capacity), requires lug nuts torqued to 97 ft-lbs, takes DOT 3 brake fluid.

2017 Toyota Tundra Specifications
Motor Oil0W-20 Full Synthetic
Oil Capacity7 qt
Lug Nut Torque97 ft-lbs
Brake FluidDOT 3
CoolantPink Long Life Coolant (OAT)
Transmission FluidATF WS
Transmission Fluid
Fluid Type
ATF WS
Shop
Coolant
Fluid Type
Pink Long Life Coolant (OAT)
Shop
Brake Fluid
Fluid Type
DOT 3
Shop
Washer Fluid
Windshield
Shop
DTC Code Lookup

Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2017 Toyota Tundra.

No known problems reported for this vehicle yet.

6 NHTSA safety recalls for the 2017 Toyota Tundra. Check your VIN at NHTSA.gov

1

STEERING:HYDRAULIC POWER ASSIST SYSTEM

Campaign: 21E103000 Date: 23/12/2021

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

Consequence

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Remedy

Dealers will inspect and replace the power steering gear assembly, free of charge. Owner notification letters were mailed on February 17, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 21TH01.

2

STEERING:HYDRAULIC POWER ASSIST SYSTEM

Campaign: 21V920000 Date: 23/11/2021

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.

Consequence

An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

Remedy

Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB10 and 21TA10.

3

SEATS:MID/REAR ASSEMBLY

Campaign: 18V123000 Date: 20/02/2018

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017 Toyota Tundra vehicles. One of the rear split bench seat leg brackets may not have been properly tightened to the vehicle's floor pan, possibly allowing the seat to move in a crash. A vehicle with an improperly tightened seat leg bracket could fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," 210, "Seat Belt Assembly Anchorages," and 225, "Child restraint anchorage systems."

Consequence

If the rear split bench seat moves in a crash, the seat occupant has an increased risk of injury.

Remedy

Toyota will notify owners, and dealers will tighten the five seat leg bracket bolts, as necessary, free of charge. The recall is expected to begin March 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0I.

4

EQUIPMENT:OTHER:LABELS

Campaign: 17V831000 Date: 20/12/2017

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017-2018 Toyota 4Runner and Tundra, 2018 Toyota Highlander, RAV4 and Lexus GX460 and 2017 Toyota Sienna and Tacoma vehicles. These vehicles may have incorrect load carrying capacity modification labels. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Consequence

An incorrect load information label can result in the operator overloading the vehicle and increasing the risk of a crash.

Remedy

Toyota will notify owners and provide them with corrected labels, free of charge. The recall began on January 23, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are H0Z for Toyota vehicles, and HLF for Lexus vehicles.

5

WHEELS:LUGS/NUTS/BOLTS/STUDS

Campaign: 17V311000 Date: 11/05/2017

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2013-2017 Toyota Tundra and Sequoia vehicles accessorized with Southeast Toyota accessory 20-inch Rockstar wheels installed by Southeast Toyota or a Southeast Toyota dealer. The Rockstar wheels were installed with lugnuts that may crack and detach.

Consequence

Lugnuts that crack and detach may cause the wheels to separate from the vehicle, increasing the risk of a crash.

Remedy

SET will notify owners, and dealers will install new replacement lugnuts, free of charge. The recall began June 23, 2017. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17A.

6

STRUCTURE:BODY:BUMPERS

Campaign: 17V051000 Date: 24/01/2017

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2017 Tundra vehicles equipped with a resin rear step bumper and resin reinforcement brackets (vehicles with chrome step bumpers are not affected). In the event of an impact to the corner of the bumper, the resin bracket may be damaged but not be noticed.

Consequence

If a person steps on the corner of the bumper that is damaged, a portion of the bumper may break away, increasing the risk of injury.

Remedy

Toyota will notify owners, and dealers will replace the resin rear bumper reinforcement brackets with steel ones, and replace the rear bumper tread, free of charge. The recall began on May 21, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0C.

Have the VIN?

Decode your VIN for even more detailed specs including trim-level data.

Decode a VIN
Tundra — Other Model Years
2026202520242023202220212020201920182016
See Also
2017 Toyota Tundra Lug Nut TorqueBest Oil for 2017 Toyota TundraAll Vehicles Using 0W-20 Full Synthetic OilAll Vehicles Using DOT 3Oil Change Guide: 2017 Toyota TundraWiper Replacement: 2017 Toyota Tundra