2018 Infiniti Qx30
Vehicle Specs & Maintenance Data
The 2018 Infiniti Qx30 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Infiniti Qx30.
For oil changes, the 2018 Infiniti Qx30 takes 0W-20 Full Synthetic motor oil with a capacity of 4.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Infiniti Qx30, torque the lug nuts to 96 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 3 NHTSA safety recalls on file for the 2018 Infiniti Qx30. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2018 Infiniti Qx30 uses 0W-20 Full Synthetic motor oil (4.5 qt capacity), requires lug nuts torqued to 96 ft-lbs, takes DOT 3 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2018 Infiniti Qx30.
No known problems reported for this vehicle yet.
3 NHTSA safety recalls for the 2018 Infiniti Qx30. Check your VIN at NHTSA.gov
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
The lack of an image in the back-up camera display increases the risk of a crash.
Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
SEAT BELTS:FRONT:ANCHORAGE
Nissan North America, Inc. (Nissan) is recalling certain 2018 Infiniti QX30 vehicles. The bolt securing the right-hand side lower seat belt anchorage may have been incorrectly installed during production. This can result in the lower seat belt anchorage detaching in a crash. As such, these vehicles fail to comply with certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", number 209, "Seat Belt Assemblies, and number 208, "Occupant Crash Protection."
If the lower seat belt anchorage detaches in a crash, it can increase the risk of injury.
Nissan will notify owners, and dealers will weld in a new retaining plate and secure the seat belt anchorage with a new anchor bolt, free of charge. All vehicles were repaired July 17, 2018. Owners may contact Infiniti customer service at 1-800-662-6200.
AIR BAGS:FRONTAL
Nissan North America, Inc. (Nissan) is recalling 2017-2018 Infiniti QX30 vehicles. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Nissan will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began March 26, 2018. Owners may contact Infiniti customer service at 1-800-622-6200, option 7.