2019 Jeep Renegade
Vehicle Specs & Maintenance Data
The 2019 Jeep Renegade maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Jeep Renegade.
For oil changes, the 2019 Jeep Renegade takes 0W-20 Full Synthetic motor oil with a capacity of 5.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Mopar OAT (Purple/Violet), and transmission fluid is ATF+4. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Jeep Renegade, torque the lug nuts to 89 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2019 Jeep Renegade have reported 5 common issues including "9-Speed Automatic Transmission Issues", "Excessive Engine Oil Consumption" and "Electrical System Malfunctions". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
There are 4 NHTSA safety recalls on file for the 2019 Jeep Renegade. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Jeep Renegade uses 0W-20 Full Synthetic motor oil (5.5 qt capacity), requires lug nuts torqued to 89 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2019 Jeep Renegade. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Jeep Renegade.
Common problems reported by 2019 Jeep Renegade owners, with recommended fixes and estimated repair costs.
9-Speed Automatic Transmission Issues
The ZF 9HP48 9-speed automatic transmission in the Renegade exhibits rough and delayed gear changes, hesitation during acceleration, and unexpected power loss during passing maneuvers. Owners report the transmission hunting between gears at steady speeds and harsh downshifts when braking. Some vehicles experience complete transmission failure.
Reflash the TCM with updated shift calibration software. TSB 21-014-22 addresses shift quality and adaptive learning resets. If harsh shifting persists, the valve body or torque converter may need replacement. Full transmission replacement for internal failures.
Est. Cost: $0 - $5,000Excessive Engine Oil Consumption
The 2.4L Tigershark engine consumes oil at an alarming rate, with some owners reporting consumption of one quart every 1,000 miles by 20,000 miles. The engine may not trigger a low oil warning until the level is critically low, risking engine damage. Dealerships have been known to dismiss the issue as 'normal consumption.'
Perform an oil consumption test at the dealership (typically monitored over 2,000 miles). If consumption exceeds one quart per 2,000 miles, the piston rings and/or valve stem seals should be replaced. TSB 09-002-22 provides diagnostic procedures for excessive oil consumption.
Est. Cost: $1,500 - $3,500Electrical System Malfunctions
The Renegade experiences a range of electrical problems including engine stalling, error and warning messages activating without cause, the auto start-stop system malfunctioning, and the engine shutting down unexpectedly. Some owners report the vehicle losing all electrical power and refusing to restart.
Diagnose with a full system scan for DTCs. Replace the Intelligent Battery Sensor if faulty. Update the Body Control Module and PCM software. TSB 08-030-22 covers electrical power management diagnostics. Check for corroded ground connections.
Est. Cost: $100 - $800Forward Collision Avoidance System Failures
The forward collision avoidance system triggers false braking events, applying the brakes when no obstacle is present and startling the driver. Conversely, the system may also fail to detect actual hazards and not intervene when needed. Warning messages about system unavailability appear frequently on the dash.
Clean the forward-facing radar sensor and camera behind the windshield. Recalibrate the system after windshield replacement. TSB 18-021-22 addresses false ADAS triggering. Software update to the ADAS module resolves most intermittent failures.
Est. Cost: $0 - $500Engine Stalling and No-Restart Conditions
The engine stalls without warning while idling at stop lights or while driving at low speeds, causing loss of power steering and power brakes. The vehicle may not restart immediately, requiring multiple attempts or a waiting period. The issue has been linked to fuel pump relay failures and PCM software bugs.
Update the PCM software and replace the fuel pump relay. TSB 14-003-22 addresses intermittent stalling. If the fuel pump itself has failed, full replacement is needed. Inspect the throttle body for carbon buildup and clean if necessary.
Est. Cost: $100 - $1,2004 NHTSA safety recalls for the 2019 Jeep Renegade. Check your VIN at NHTSA.gov
AIR BAGS:FRONTAL
Chrysler (FCA US, LLC) is recalling certain 2017-2024 Alfa Romeo Giulia, 2018-2025 Alfa Romeo Stelvio, 2019-2023 Fiat 500X, Jeep Renegade, and 2024 Fiat 500E vehicles. A seat belt buckle switch sensor may be improperly connected, preventing the front seat air bag from deploying as intended.
A front seat air bag that does not deploy as intended can increase the risk of injury in a crash.
Dealers will repair the connection, free of charge. Owner notification letters were mailed beginning August 27, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 82B.
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
The lingering rearview image can distract the driver, increasing the risk of a crash.
Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W30-W37.
AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Renegade vehicles equipped with the Upland trim package. The Occupant Restraint Controller (ORC) may have been incorrectly calibrated.
The miscalibrated ORC may incorrectly deploy the air bags during a frontal crash, increasing the risk of injury.
Chrysler will notify owners, and dealers will replace the ORC. The recall began September 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V73.
AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Renegade and Fiat 500X vehicles. Incorrect software may cause the occupant restraint controller (ORC) module to disable certain passive safety features.
Deactivated passive safety features can increase the risk of injury in the event of a crash.
Chrysler will notify owners, and dealers will update the ORC module software, free of charge. The recall began May 2, 2019. Owners may contact Chrysler's customer service at 1-800-853-1403. Chrysler's number for this recall is V42.