2019 Mitsubishi Eclipse Cross
Vehicle Specs & Maintenance Data
The 2019 Mitsubishi Eclipse Cross maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Mitsubishi Eclipse Cross.
For oil changes, the 2019 Mitsubishi Eclipse Cross takes 0W-20 Full Synthetic motor oil with a capacity of 4 quarts. Brake fluid type is DOT 3, the recommended coolant is Dia Queen Super Long Life Coolant (Green), and transmission fluid is Mitsubishi CVTF-J4. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Mitsubishi Eclipse Cross, torque the lug nuts to 65-80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2019 Mitsubishi Eclipse Cross have reported 5 common issues including "CVT Jerking and Rough Engagement", "Infotainment Touchscreen Unresponsive Zones" and "S-AWC Rear Differential Pump Noise". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
There is 1 NHTSA safety recall on file for the 2019 Mitsubishi Eclipse Cross. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Mitsubishi Eclipse Cross uses 0W-20 Full Synthetic motor oil (4 qt capacity), requires lug nuts torqued to 65-80 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2019 Mitsubishi Eclipse Cross. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Mitsubishi Eclipse Cross.
Common problems reported by 2019 Mitsubishi Eclipse Cross owners, with recommended fixes and estimated repair costs.
CVT Jerking and Rough Engagement
The CVT exhibits jerky engagement when shifting from Park to Drive or Reverse, and produces a shuddering sensation during low-speed maneuvers. Some owners report the transmission slipping under hard acceleration. The JATCO-sourced CVT in the Eclipse Cross shares components with other Mitsubishi/Nissan models known for CVT issues.
A CVT reprogramming through a TCM software update improves engagement quality. Mitsubishi service bulletins addressing CVT jerkiness may apply. A CVT fluid drain and refill with the specified DiaQueen CVTF-J4 can also smooth out operation.
Est. Cost: $0 (warranty software update) / $200 - $400 (fluid exchange)Infotainment Touchscreen Unresponsive Zones
The 8-inch touchscreen develops unresponsive zones, particularly along the bottom and right edges. Touch inputs register in the wrong location or require multiple presses. The issue worsens in cold weather when the screen is less sensitive to capacitive touch.
A software update may improve touch sensitivity calibration. If the touchscreen digitizer has failed, the entire infotainment display unit requires replacement. Using a soft-tip stylus can help in cold weather as a temporary workaround.
Est. Cost: $0 (software update) / $500 - $1,200 (display unit replacement)S-AWC Rear Differential Pump Noise
AWD-equipped Eclipse Cross models develop a humming or whirring noise from the rear differential electronic coupling. The noise increases with speed and is most noticeable at 30-50 mph. The electronically controlled coupling generates heat that degrades the fluid, causing noise and eventual reduced AWD functionality.
Replace the rear differential coupling fluid with fresh Mitsubishi-specified fluid. If the coupling pump motor is excessively noisy, the rear differential coupling assembly may require replacement. Regular fluid changes every 30,000 miles are recommended.
Est. Cost: $100 - $250 (fluid change) / $1,200 - $2,500 (coupling assembly replacement)Automatic Climate Control Erratic Behavior
The automatic climate control system blows hot air on one side and cold on the other, fails to maintain the set temperature, or switches between defrost and floor modes randomly. The issue is attributed to a faulty blend door actuator or an ambient temperature sensor giving incorrect readings.
Diagnose and replace the faulty blend door actuator. The in-cabin temperature sensor and ambient air temperature sensor should be checked and replaced if readings are inaccurate. A reset of the HVAC control module can resolve software-related glitches.
Est. Cost: $200 - $500 (blend door actuator) / $100 - $200 (temperature sensor)Windshield Stress Cracking
Owners report windshield cracks appearing without any visible point of impact, typically starting from the edges near the A-pillars or along the base. The cracks develop due to stress from the windshield installation or frame flexing. Temperature changes accelerate the crack propagation.
Windshield replacement is the only solution. Ensure the replacement is installed using the proper adhesive and torque specifications for the windshield clips. Filing a claim through Mitsubishi customer affairs may result in goodwill coverage for windshields that crack within the first year.
Est. Cost: $300 - $600 (windshield replacement) / $0 (if goodwill claim is approved)1 NHTSA safety recall for the 2019 Mitsubishi Eclipse Cross. Check your VIN at NHTSA.gov
ELECTRICAL SYSTEM:SOFTWARE
Mitsubishi Motors North America (MMNA) is recalling certain 2018 Mitsubishi Outlander PHEV, Outlander Sport, 2018-2019 Eclipse Cross, and 2017-2018 Outlander vehicles equipped with a Forward Collision Mitigation (FCM) system that detects pedestrians. Due to incorrect software, the FCM-ECU (Electronic Control Unit) may apply braking for longer than needed, even after a pedestrian is no longer detected.
If the FCM-ECU software activates the brake for longer than necessary, the driver may react by applying additional braking. The resulting rapid deceleration of the vehicle can increase the risk of a rear-end collision.
MMNA will notify owners, and dealers will reprogram the FCM-ECU software with updated software, free of charge. The recall is began October 16, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-007.