2019 Nissan Nv
Vehicle Specs & Maintenance Data
The 2019 Nissan Nv maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Nissan Nv.
For oil changes, the 2019 Nissan Nv takes 5W-30 Full Synthetic motor oil with a capacity of 5.6 quarts. Brake fluid type is DOT 3, the recommended coolant is Blue Long Life Coolant (OAT), and transmission fluid is Nissan Matic S. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Nissan Nv, torque the lug nuts to 80 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2019 Nissan Nv have reported 5 common issues including "Transmission Harsh Shifting and Failure", "Electrical System and Body Control Module Issues" and "HVAC Blower Motor and Heater Core Issues". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Nissan Nv uses 5W-30 Full Synthetic motor oil (5.6 qt capacity), requires lug nuts torqued to 80 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2019 Nissan Nv. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Nissan Nv.
Common problems reported by 2019 Nissan Nv owners, with recommended fixes and estimated repair costs.
Transmission Harsh Shifting and Failure
The NV1500/2500/3500 commercial vans equipped with the 5-speed automatic (NV1500) or 7-speed automatic (NV2500/3500) can develop harsh shifting, delayed engagement, and transmission slipping. Commercial vehicles accumulating high mileage under heavy loads experience accelerated transmission wear. Some owners report complete transmission failure before 100,000 miles.
Perform transmission fluid and filter changes every 30,000 miles for vehicles under heavy commercial use. TSB NTB17-082 addresses certain shift quality concerns with a TCM software update. If internal damage has occurred, transmission rebuild or replacement with a remanufactured unit is required.
Est. Cost: $300 - $5,500Electrical System and Body Control Module Issues
The NV's electrical system can develop intermittent faults affecting multiple systems simultaneously. Symptoms include erratic dashboard warning lights, power window malfunctions, door lock cycling, intermittent no-start conditions, and battery drain. The body control module (BCM) and its wiring connections are often the root cause.
Start by checking all ground connections and battery terminals for corrosion. Have the BCM and associated wiring inspected for loose connectors. A BCM software update or replacement may be needed. For parasitic battery drain, perform a current draw test to isolate the offending circuit.
Est. Cost: $200 - $1,500HVAC Blower Motor and Heater Core Issues
The HVAC blower motor can fail or develop noisy bearings, producing a squealing or grinding noise when running. The heater core can also develop leaks, causing a sweet coolant smell inside the cabin, foggy windshield, and wet passenger-side carpet. In a commercial van, HVAC reliability is critical for daily operations.
Replace the blower motor and blower motor resistor if the motor has failed or is noisy. For heater core leaks, the entire dashboard must be removed to access the heater core, making this a labor-intensive repair. Flush the cooling system after heater core replacement to prevent debris from clogging the new core.
Est. Cost: $200 - $1,500Rear Door Hinge and Latch Wear
The large rear barn-style doors on the NV cargo van experience significant hinge and latch wear from frequent commercial use. The hinges can sag, causing difficulty closing the doors and wind noise during driving. Door check straps can break, allowing doors to swing open uncontrollably and potentially striking adjacent vehicles.
Lubricate door hinges and latch mechanisms regularly as preventive maintenance. Replace worn hinges, latch strikers, and door check straps as they wear. Adjusting the door alignment by shimming the hinges can correct minor sagging. Replace the door hold-open device if the doors do not stay in the open position.
Est. Cost: $150 - $600Exhaust Manifold and Catalytic Converter Issues
The VQ40DE V6 engine's exhaust manifolds can crack or develop leaks at the manifold-to-head gaskets, causing a ticking noise on startup and an exhaust smell in the cabin. The catalytic converters can also fail prematurely on high-mileage commercial vehicles, triggering P0420/P0430 efficiency codes and emissions failures.
Replace cracked exhaust manifolds and gaskets. Use OEM manifold studs as aftermarket studs are prone to breaking. For catalytic converter failure, replace with OEM or CARB-compliant units. On the V8 models (VK56DE), inspect the exhaust manifold bolts which are known to loosen and break.
Est. Cost: $500 - $2,500