2019 Rolls-Royce Cullinan
Vehicle Specs & Maintenance Data
The 2019 Rolls-Royce Cullinan maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Rolls-Royce Cullinan.
For oil changes, the 2019 Rolls-Royce Cullinan takes 0W-40 Full Synthetic motor oil with a capacity of 9 quarts. Brake fluid type is DOT 4, the recommended coolant is BMW Coolant (Blue, phosphate-free), and transmission fluid is ZF Lifeguard 8 (ATF). Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Rolls-Royce Cullinan, torque the lug nuts to 103 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
There are 2 NHTSA safety recalls on file for the 2019 Rolls-Royce Cullinan. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Rolls-Royce Cullinan uses 0W-40 Full Synthetic motor oil (9 qt capacity), requires lug nuts torqued to 103 ft-lbs, takes DOT 4 brake fluid.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Rolls-Royce Cullinan.
No known problems reported for this vehicle yet.
2 NHTSA safety recalls for the 2019 Rolls-Royce Cullinan. Check your VIN at NHTSA.gov
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
The lack of an image in the back-up camera display increases the risk of a crash.
BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
EXTERIOR LIGHTING:BRAKE LIGHTS
BMW of North America, LLC (BMW) is recalling certain 2019 Rolls-Royce Cullinan vehicles. The brake lights may not be bright enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Without a sufficient level of brightness from the brake lights, the vehicle may have reduced visibility to other drivers when braking, increasing the risk of a crash.
Rolls-Royce Motor Cars will notify owners, and Rolls-Royce Motor Car dealers will update the brake light software, free of charge. The recall began October 22, 2019. Owners may contact Rolls-Royce Motor Cars Customer Relations and Services at 1-866-230-4956 or at [email protected].