2019 Subaru Crosstrek
Vehicle Specs & Maintenance Data
The 2019 Subaru Crosstrek maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Subaru Crosstrek.
For oil changes, the 2019 Subaru Crosstrek takes 0W-20 Full Synthetic motor oil with a capacity of 4.4 quarts. Brake fluid type is DOT 3, the recommended coolant is Super Long Life Coolant (Blue), and transmission fluid is Subaru ATF. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Subaru Crosstrek, torque the lug nuts to 89 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2019 Subaru Crosstrek have reported 5 common issues including "Excessive Engine Noise Under Acceleration", "Front Strut Mount Surface Rust" and "Brake Pedal Squeaking". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
There are 7 NHTSA safety recalls on file for the 2019 Subaru Crosstrek. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2019 Subaru Crosstrek uses 0W-20 Full Synthetic motor oil (4.4 qt capacity), requires lug nuts torqued to 89 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2019 Subaru Crosstrek. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2019 Subaru Crosstrek.
Common problems reported by 2019 Subaru Crosstrek owners, with recommended fixes and estimated repair costs.
Excessive Engine Noise Under Acceleration
The 2.0L FB20 boxer engine produces an excessively loud droning and buzzing noise when accelerating from a stop or when the pedal is pressed harder. The CVT holds the engine at high RPM to extract power from the underpowered base engine, amplifying the noise.
This is largely a design characteristic of the 2.0L engine and CVT pairing. Upgrading to the 2.5L engine (available on Sport and Limited trims) significantly reduces the issue. Sound deadening material can help reduce cabin noise.
Est. Cost: $100 - $400 (sound deadening)Front Strut Mount Surface Rust
Surface rust accumulates in the top center retaining nut area of the front strut mounts, causing a creaking or popping noise when turning the steering wheel or driving over bumps. The corrosion can eventually compromise the strut mount integrity.
A Subaru TSB provides a procedure to clean the rust and apply corrosion protection to the strut mount area. In advanced cases, the strut mount assemblies require replacement.
Est. Cost: $100 - $500Brake Pedal Squeaking
The brake pedal emits a squeaking or creaking sound during operation, particularly noticeable in quiet driving conditions. The noise originates from the brake pedal pivot point and is cosmetic rather than a braking performance issue.
A Subaru TSB addresses this by lubricating the brake pedal pivot bushing. In some cases, the pedal assembly bushings are replaced. The repair is typically straightforward.
Est. Cost: $0 - $150Catalytic Converter Efficiency Code P0420
The check engine light illuminates with DTC P0420 (Catalyst System Efficiency Below Threshold Bank 1), indicating reduced catalytic converter efficiency. This may occur before 100,000 miles and can cause emission test failures.
A Subaru TSB provides diagnostic procedures for this DTC. ECM reprogramming may resolve false triggers. If the catalytic converter has genuinely degraded, replacement under the federal emissions warranty (8 years/80,000 miles) may apply.
Est. Cost: $0 (warranty) / $1,000 - $2,500 if out of warrantyWindshield Cracking from Minor Impacts
The windshield is prone to cracking from minor stone chips that would not damage windshields on other vehicles. Cracks spread quickly and often originate near the EyeSight camera housings at the top of the windshield.
Windshield replacement with an OEM Subaru windshield is required. Aftermarket windshields may interfere with EyeSight calibration. EyeSight recalibration is mandatory after windshield replacement.
Est. Cost: $500 - $1,200 (includes EyeSight recalibration)7 NHTSA safety recalls for the 2019 Subaru Crosstrek. Check your VIN at NHTSA.gov
SUSPENSION:REAR
Subaru of America, Inc. (Subaru) is recalling certain 2018-2019 Subaru Crosstrek, 2019 Crosstrek Hybrid, and 2019 Forester vehicles. The rear stabilizer bracket bolts may loosen and detach.
Missing bolts may allow the rear stabilizer bracket to shift, increasing the risk of a crash.
Subaru will notify owners, and dealers will retorque and replace any missing bolts, free of charge. Owner notification letters were mailed May 17, 2021. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRD-21.
ELECTRICAL SYSTEM:SOFTWARE
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 Subaru Impreza and 2018-2019 Crosstrek vehicles. The Engine Control Module (ECM) may continue to power the ignition coil after the engine is shut off, causing a short circuit.
A short circuit in the ignition coils may cause a stall, increasing the risk of a crash.
Subaru will notify owners, and dealers will update the ECM software, replace the ignition coils and, if necessary, the front exhaust pipe, free of charge. Owner notification letters were mailed beginning June 1, 2021. Owners can contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRE-21. Note: This recall includes all vehicles previously repaired under Recall 19V743.
SEAT BELTS:REAR/OTHER
Subaru of America, Inc. (Subaru) is recalling certain 2019 Crosstrek vehicles with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
Subaru will notify owners, and dealers will replace rear seat belt assemblies, free of charge. The began April 15, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRC-20.
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
Subaru of America, Inc. (Subaru) is recalling certain 2019 Crosstrek, Forester, and Ascent vehicles. The aluminum Positive Crankcase Ventilation (PCV) valve can separate, allowing the separated components to enter the engine, resulting in a loss of power while driving.
An unexpected loss of power while driving can increase the risk of a crash.
Subaru will notify owners, and dealers will inspect and replace the PCV valve, free of charge. If the PCV valve has separated and the components cannot be found, the short block engine will be replaced, free of charge. The recall began January 31, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUW-08.
ELECTRICAL SYSTEM:SOFTWARE
Subaru of America, Inc. (Subaru) is recalling certain 2017-2019 Impreza and 2018-2019 Crosstrek vehicles. The Engine Control Module (ECM) may continue to power the ignition coil after the engine is shut off, which could result in a short circuit and blown fuse.
If a short circuit occurs while driving, the vehicle may stall, increasing the risk of a crash.
Subaru will notify owners, and dealers will update the ECM software and inspect and replace the ignition coil, as necessary, free of charge. In addition, on vehicles with confirmed ignition coil damage and a certain stored diagnostic trouble code (DTC), Subaru will replace the front exhaust pipe, free of charge. The recall began December 4, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUQ-02.
VISIBILITY:GLASS, SIDE/REAR
Subaru of America, Inc. (Subaru) is recalling certain 2019 Crosstrek vehicles. The driver's side rear-door window glass may be improperly tempered. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Improperly tempered glass can shatter into large pieces, increasing the risk of injury.
Subaru will notify owners, and dealers will replace the driver's side rear-door window glass, free of charge. The recall began June 11, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUG-92.
STEERING:ELECTRIC POWER ASSIST SYSTEM
Subaru of America, Inc. (Subaru) is recalling certain 2019 Forester and Crosstrek vehicles. A connector inside the Electronic Power Steering (EPS) unit may short circuit resulting in a loss of electric power steering assistance.
Loss of power steering assist would require higher steering effort, increasing the risk of a crash.
None of the affected vehicles have been sold yet. Subaru has notified dealers and they will inspect the steering gearbox, replacing it as necessary, free of charge. The recall began February 7, 2019. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUC-88.