2020 Chrysler 300
Vehicle Specs & Maintenance Data
The 2020 Chrysler 300 maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Chrysler 300.
For oil changes, the 2020 Chrysler 300 takes 5W-20 Full Synthetic motor oil with a capacity of 5.9 quarts. Brake fluid type is DOT 3, the recommended coolant is Mopar OAT (Purple/Violet), and transmission fluid is ATF+4. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Chrysler 300, torque the lug nuts to 130 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2020 Chrysler 300 have reported 5 common issues including "5.7L HEMI Lifter Tick and MDS Issues", "ZF 8-Speed Transmission D-Clutch Failure" and "TPMS Sensor Battery Premature Failure". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
There are 2 NHTSA safety recalls on file for the 2020 Chrysler 300. Check the Recalls tab below for full details.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2020 Chrysler 300 uses 5W-20 Full Synthetic motor oil (5.9 qt capacity), requires lug nuts torqued to 130 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2020 Chrysler 300. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2020 Chrysler 300.
Common problems reported by 2020 Chrysler 300 owners, with recommended fixes and estimated repair costs.
5.7L HEMI Lifter Tick and MDS Issues
The 5.7L HEMI V8 in the 300S and 300C develops the characteristic 'HEMI tick' from worn hydraulic roller lifters associated with the Multi-Displacement System (MDS). The ticking is most prominent on cold starts but can become constant. If ignored, worn lifters can damage camshaft lobes and cause misfires, rough idle, and reduced power.
Replace the affected lifters and camshaft with updated parts featuring improved needle bearings (latest 'AD' suffix revision). TSB 09-002-22 covers HEMI lifter noise diagnostics. Maintain oil changes every 5,000 miles with OEM-specified 0W-20 full synthetic. MDS delete kits are available as a preventive measure.
Est. Cost: $2,000 - $5,000ZF 8-Speed Transmission D-Clutch Failure
The ZF 8HP 8-speed automatic transmission develops D-Clutch pack failures causing the Malfunction Indicator Lamp to illuminate with DTC P0733-00 (Gear 3 Incorrect Ratio). Symptoms include slipping during 2-3 upshift, harsh shifts, and the transmission going into limp mode. The issue is caused by worn clutch pack friction material.
Perform a D-Clutch repair per TSB 21-022-22 (D-Clutch Repair). The repair involves replacing the clutch pack within the transmission. Reflash the TCM with updated software. A full transmission fluid exchange with ZF Lifeguard 8 ATF is performed during the repair.
Est. Cost: $800 - $2,500TPMS Sensor Battery Premature Failure
The Tire Pressure Monitoring System sensor batteries fail prematurely, rendering the TPMS inoperative and illuminating a persistent warning light. Without functioning sensors, the driver receives no alerts about tire pressure loss, which is a federal safety compliance issue.
NHTSA Recall 22V-578 covers inspection and replacement of TPMS sensors with updated units featuring improved battery life. All four wheel sensors and the spare should be checked and replaced at no cost.
Est. Cost: Covered under recallElectrical System and Air Bag Concerns
Owners report various electrical failures including faulty gauges, malfunctioning power windows, dashboard warning lights appearing without cause, and door locks operating erratically. More seriously, at least one complaint to NHTSA documented air bags failing to deploy during a 40 MPH frontal collision, raising critical safety concerns.
Perform a full electrical system diagnostic scan. TSB 08-050-22 covers body electrical diagnostics. Inspect all ground connections and clean corroded terminals. For air bag non-deployment concerns, have the SRS (Supplemental Restraint System) module inspected and ensure all recalls are completed. Report non-deployment events to NHTSA.
Est. Cost: $100 - $1,000HVAC Musty Odor and Climate Control Issues
A musty or mildew smell emanates from the HVAC vents, particularly when first turning on the air conditioning. The evaporator core accumulates moisture and bacteria, producing the unpleasant odor. Some owners also report the climate control not maintaining set temperatures and the gear shift occasionally getting stuck.
Treat the evaporator core with an antimicrobial foaming cleaner through the cabin air filter access. Replace the cabin air filter. TSB 24-008-22 addresses HVAC odor concerns. Running the fan on high with AC off for 2-3 minutes before shutting off the vehicle helps dry the evaporator and prevent mold growth.
Est. Cost: $50 - $3002 NHTSA safety recalls for the 2020 Chrysler 300. Check your VIN at NHTSA.gov
AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR
Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2018-2021 Dodge Charger and Chrysler 300 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury or death.
Dealers will replace both side curtain air bags, free of charge. Owner notification letters were mailed beginning February 20, 2025. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 19B.
VISIBILITY:WINDSHIELD
Chrysler (FCA US, LLC) is recalling certain 2020-2021 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
A windshield that separates from the vehicle during a crash can increase the risk of injury.
Dealers will remove and replace the front windshield urethane sealant, free of charge. Owner notification letters were mailed on August 31, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y47.