2025 Jeep Wagoneer
Vehicle Specs & Maintenance Data
The 2025 Jeep Wagoneer maintenance specs on this page cover the key fluids, torque values, and wear items you need for routine service. Use these numbers as a quick reference when performing oil changes, tire rotations, brake jobs, and other scheduled maintenance on your Jeep Wagoneer.
For oil changes, the 2025 Jeep Wagoneer takes 5W-40 Full Synthetic motor oil with a capacity of 8.5 quarts. Brake fluid type is DOT 3, the recommended coolant is Mopar OAT (Purple/Violet), and transmission fluid is ATF+4. Always use the manufacturer-recommended fluids to maintain warranty coverage and engine longevity.
When mounting wheels on the Jeep Wagoneer, torque the lug nuts to 100 ft-lbs using a calibrated torque wrench. Over- or under-torquing can lead to warped brake rotors or loose wheels. Re-torque after 50 to 100 miles on newly installed wheels.
Owners of the 2025 Jeep Wagoneer have reported 5 common issues including "Electrical System Drain and Failures", "eTorque Mild Hybrid System Stalling" and "Infotainment Touchscreen Glitches and Reboots". Scroll down to the Diagnostics tab for detailed descriptions, solutions, and estimated repair costs.
Specifications on this page are compiled from multiple publicly available sources including manufacturer documentation, NHTSA data, and automotive databases. Always cross-reference with your owner's manual or official factory documentation before purchasing parts or performing any service.
The 2025 Jeep Wagoneer uses 5W-40 Full Synthetic motor oil (8.5 qt capacity), requires lug nuts torqued to 100 ft-lbs, takes DOT 3 brake fluid.
Manufacturer-recommended maintenance schedule for the 2025 Jeep Wagoneer. Always verify intervals against your owner's manual.
Enter a diagnostic trouble code to see causes, symptoms, and fixes for the 2025 Jeep Wagoneer.
Common problems reported by 2025 Jeep Wagoneer owners, with recommended fixes and estimated repair costs.
Electrical System Drain and Failures
The 2022 Wagoneer's complex electrical system is prone to parasitic battery drain that leaves the vehicle unable to start. Nearly half of NHTSA complaints involve electrical issues, including faulty keyfobs, seat heaters stopping, wiring shorts, and the vehicle losing power unexpectedly. The advanced driver-assist features frequently malfunction or display false warnings.
Diagnose parasitic draw with an ammeter and identify the offending circuit. Common culprits include the Uconnect module and body control module not entering sleep mode. TSB 08-078-22 addresses battery drain diagnostics. Replace the 12V battery with an AGM unit rated for the vehicle's electrical load.
Est. Cost: $200 - $800eTorque Mild Hybrid System Stalling
Vehicles equipped with the 5.7L eTorque V8 experience sudden engine stalls while driving, followed by automatic parking brake engagement. The Motor Generator Unit (MGU) may fail, producing a loud whining noise. The 48-volt battery pack can fail prematurely, causing no-start conditions. NHTSA opened Preliminary Evaluation PE24018 covering approximately 150,000 vehicles.
Replace the 48V battery pack if it fails to hold charge. Update the eTorque system software. TSB 14-010-22 addresses MGU communication faults. For stalling issues, the PCM and eTorque module may both need reprogramming. Replace the MGU if whining noise is present.
Est. Cost: $500 - $3,000Infotainment Touchscreen Glitches and Reboots
The large Uconnect 5 touchscreen randomly reboots while driving, displays static lines, goes partially blank, or becomes completely unresponsive. Android Auto and Apple CarPlay connections drop frequently. The rear-seat entertainment screens may also freeze. Some owners have required complete screen replacements.
Perform Uconnect software update to the latest version. TSB 08-060-22 covers infotainment display diagnostics. If the screen shows hardware artifacts (static lines, partial blackout), the display module must be replaced. A master reset of the infotainment system may resolve software-related crashes.
Est. Cost: $0 - $2,000HVAC Rear Climate Control Inadequacy
The rear cabin air conditioning provides insufficient cooling, particularly in the second and third rows. Front vents may also have weak airflow from certain outlets. Owners in hot climates report that the rear passengers are uncomfortably warm even with the system set to maximum cooling.
Inspect the rear HVAC blend door actuators and ducts for blockage. TSB 24-010-22 addresses rear climate performance. Replace the rear blower motor resistor if fan speeds are inconsistent. Ensure the cabin air filter is not clogged.
Est. Cost: $100 - $600Windshield Distortion and Paint Defects
Multiple owners report optical distortions in the center of the windshield that obstruct the driver's vision and increase crash risk. The factory paint is also prone to peeling, chipping, and premature fading, particularly on darker colors. These cosmetic defects are unexpected on a premium $60,000+ vehicle.
Replace the windshield with a Mopar OEM unit under warranty if distortion is confirmed during inspection. Paint peeling claims should be filed under the factory corrosion/paint warranty (3 years/36,000 miles). Document with photos for warranty claims.
Est. Cost: $0 - $1,500