2008 Jaguar Xk Wiper Blade Replacement Guide

Wipers Beginner 10 min

Tools & Supplies You'll Need

Step 1

Get the right wiper sizes

The 2008 Jaguar Xk wiper blade sizes are: the correct sizes. Purchase blades matching these exact sizes.

Step 2

Lift the wiper arm

Pull the wiper arm away from the windshield until it stays in the upright position. Be careful — if the arm snaps back, it can crack the windshield.

Step 3

Remove the old blade

Press the release tab where the blade meets the arm, then slide the old blade off the hook. Some vehicles use a pin-type or bayonet-type mount — check the attachment before forcing it.

Step 4

Attach the new blade

Slide the new blade onto the wiper arm hook until it clicks into place. Gently lower the arm back to the windshield.

Step 5

Repeat for other blades

Replace the passenger-side blade the same way. If your 2008 Jaguar Xk has a rear wiper, replace that too.

Step 6

Test the wipers

Spray washer fluid and run the wipers through a few cycles. Check for streaking, chattering, or missed areas. New blades should wipe cleanly.

2008 Jaguar Xk Wiper Blade Sizes

The factory wiper blade sizes for the 2008 Jaguar Xk are: the sizes listed in your owner's manual.

Wiper blades should be replaced every 6-12 months, or whenever you notice streaking, chattering, or reduced visibility. Worn blades are a safety hazard in rain and snow.

Choosing Replacement Blades

All major brands (Bosch, Rain-X, PIAA, Michelin) make blades that fit the Jaguar Xk. Match the size exactly when ordering.

More 2008 Jaguar Xk Guides
Oil Change: 2008 Jaguar Xk Wheel Service: 2008 Jaguar Xk Brakes: 2008 Jaguar Xk

View Full 2008 Jaguar Xk Specs

Oil type, torque, brake fluid, coolant, wipers, and more.

Full Specs